Introduction: The QIS-IHP300E equipment uses clean compressed air as the power to provide high-pressure high-speed airflow. Using the Venturi effect, the high-speed airflow and the hydrogen peroxide solution pass through a specific atomizing nozzle to produce hydrogen peroxide in a dry mist state. Hydrogen peroxide in the state of dry mist quickly diffuses in the environment and acts on bacteria, fungi, viruses and spores, and can simultaneously achieve good disinfection effect on the air and the surface of objects in the environment. Features 1. Use low concentration of hydrogen peroxide to reduce corrosion 2. The average particle size is 7.5μm 3. Hydrogen peroxide particles formed by dry mist technology can be suspended in the air for a long time to carry out irregular Brownian motion to ensure the penetration and sterilization effect in complex areas. 4. The formed hydrogen peroxide particles are relatively dry and will rebound after contacting the surface of the object. They will not condense together to form liquid films or droplets like large wet particles, and will not corrode the color steel plate and epoxy floor. 5. Adopt high-speed fan air supply system, which can produce nano particles to reach different areas of the clean area effectively. 6. It is suitable for sterilization and sterilization of various spaces or surfaces with different sizes. The single sterilization space is 300m³ 7. Logarithmic logarithmic decline was verified by the biological indicator lipophilic thermophilus. 8. Equipped with a time program controller to ensure that the clean space is disinfected and sterilized according to the set program every day, without the presence of an operator, and can be automatically shut down after the spray is completed. 9. No external gas source is required, and it is equipped with solvent filtration, without the risk of clogging the nozzle. 10. Comes with indicator light, you can observe the working status of the device through the indicator light change. Application field Hospital wards, infection departments, operating rooms, clinics, dressing rooms, negative pressure wards, fever clinics, ambulances, medical examination vehicles, blood donation vehicles, etc.; Sterile pharmaceutical clean area, sterile testing room, biological safety laboratory, animal room; Technical Parameters Voltage: 220V±20V 50HZ±1HZ Power: 2000W Atomization speed: 32ml/min Storage volume: 1500ml Sterilizer: 6-8% hydrogen peroxide solution Sterilization space: 300 cubic meters Sterilization time: 3 hours External dimensions: 380×380×800 length×width×height) Net weight: 30g
Introduction: The QIS-IHP300E equipment uses clean compressed air as the power to provide high-pressure high-speed airflow. Using the Venturi effect, the high-speed airflow and the hydrogen peroxide solution pass through a specific atomizing nozzle to produce hydrogen peroxide in a dry mist state. Hydrogen peroxide in the state of dry mist quickly diffuses in the environment and acts on bacteria, fungi, viruses and spores, and can simultaneously achieve good disinfection effect on the air and the surface of objects in the environment.
