Introduction: The small spray dryer is mainly used in universities, research institutes and food and pharmaceutical companies to produce micro-particle powders. It has broad-spectrum applicability to all solutions such as emulsions and suspensions. It is suitable for drying sensitive substances such as bio-sensitive substances. Products, biological pesticides, enzyme preparations, etc., because the materials ejected are only subjected to high temperature when sprayed into mist-sized particles, so they are only heated instantaneously, and the active materials can be kept from being damaged after drying. Features: 1. Original imported nozzle, high efficiency. 2. Color LCD touch screen parameter display: air inlet temperature / air outlet temperature / peristaltic pump speed / air volume / needle frequency. 3. There is a nozzle cleaner (through needle), which will automatically clear when the nozzle is blocked, and the frequency of the needle can be adjusted automatically. 4. Shutdown protection function: Just press the stop button when shutting down, the machine will stop running immediately except the fan to ensure that the equipment will not burn out due to misoperation (forced off the fan). 5. The spray, drying and collection system is made of transparent high-quality borosilicate heat-resistant glass material, so that the drying process can be carried out in a non-polluting environment. 6. The atomization structure of the two-fluid spray, the whole machine is made of high-quality stainless steel material, and the design is compact, no auxiliary equipment is needed. 7. The design of dry temperature control adopts real-time regulation PID constant temperature control technology to make the temperature control in the whole temperature zone accurate and the heating temperature control precision ±1 °C. 8. In order to keep the sample clean, an air inlet filter is provided. 9. The feed amount can be adjusted by the feed peristaltic pump, and the minimum sample volume can reach 30ml. 10. Dry powder after drying, the particle size is relatively uniform, and more than 95% of the dry powder is in the same particle size range. 11. For the adhesive material, there is a nozzle cleaner (through needle), which will automatically clear when the nozzle is blocked, and the frequency of the needle can be adjusted automatically. Technical Parameters: Inlet air temperature control: 30 °C ~ 400 °C Outlet temperature control: 30 °C ~ 200 °C Evaporation water volume: 1500mL / H ~ 2000ml / h Feeding amount: 50～2200ml/h (adjustable) Feeding mode: peristaltic pump adjustment Dry air flux: maximum air volume 0-330m3/h maximum wind pressure 686Pa Temperature control accuracy: ±0.5 °C Average drying time: 0.8 to 1S Machine power: 3.8KW / 220V Dimensions: 1380mm (height) × 770mm (length) × 590mm (width)
Introduction: The small spray dryer is mainly used in universities, research institutes and food and pharmaceutical companies to produce micro-particle powders. It has broad-spectrum applicability to all solutions such as emulsions and suspensions. It is suitable for drying sensitive substances such as bio-sensitive substances. Products, biological pesticides, enzyme preparations, etc., because the materials ejected are only subjected to high temperature when sprayed into mist-sized particles, so they are only heated instantaneously, and the active materials can be kept from being damaged after drying.
