QFS601 Gas Moisture Analyzer Introduction
QFS601-2gas moisture analyzer is a non absolute method, using wet sensitive film device of moisture measuring instrument, with rapid response, wide measuring range, sensitive, simple and convenient operating characteristics.
In selecting high stability of wet sensitive device based on configuration precision perfect gas circuit system and circuit design, strict process, make the accurate and reliable, fast measurement of new dew-point meter, to avoid the such moisture sensor easily drift weaknesses, has the very good long-term stability and resistance to dust particles, not affected by oil and gas and most chemical gas influence, widely applicable to build gas, electric power, petroleum chemical industry, electronic industry, heat treatment etc a variety of gas water content rapid detection. The instrument that can be used as laboratory equipment for continuous measurement, also can be used in the production process for continuous monitoring.
The instrument in addition to dew point value outside, still have a volume ratio and so on many kinds of display mode, the measurement data can be saved. Instrument built-in high capacity rechargeable battery, ac/dc, especially suitable for no ac power source area to the field detection. technical indicators
1. The range of measurement: dew point - 80 °C ~ + and (about 0.5 ~ 23632 μ L/L)
2. Absolute error: when the factory or less ± 1 °C; Long-term (2 years) operation ± 3 °C or less
3. Response time: by 63% (90%) meter, in the dew point - °C below, rise < 30 "(sixty"),
Down < sixty "(400); The higher the humidity, the faster response
4. Output signal: 4 ~ and ma, RS232 or USB port (must be specified by customer)
5. Power supply: ac 220 + 22 v, fifty to sixty hz; Dc: instrument built-in battery
6. Medium conditions: temperature < + sixty °C
Pressure < 2 mp
Flow of 200 ml/min (recommended)
7. Body product: width × × high deep = 260 mm x 170 mm x 300 mm
QFS601 Gas Moisture Analyzer is a non-absolute moisture measurement instrument using moisture-sensitive thin film devices. It has the characteristics of fast response, wide measurement range, sensitivity, and easy operation. Based on the selection of high-stability humidity-sensitive devices, a precise and complete gas system and circuit design are configured, and a strict new process is used to create a new type of dewpoint meter that is accurate, reliable, and fast to measure, and avoids such moisture-sensitive components from drifting It has good long-term stability, is resistant to dust particles, and is not affected by oil and gas and most chemical gases. It is widely applicable to the rapid moisture content of various gases in the fields of gas generation, electric power, petrochemical industry, electronics industry, and heat treatment. Detection. The instrument can be used as a laboratory instrument for intermittent measurements or for continuous monitoring of production processes. In addition to the dew point value, the instrument also has a variety of display modes such as volume ratio, and measurement data can be saved. The instrument has a built-in large-capacity rechargeable battery, AC and DC dual-use, and is especially suitable for on-site testing in places without AC power.
