Position: Home > > Life science instrument and equipment > Clinical test instrument and equipment > Biochemical analyzer > PUS-2018G Semi-automatic biochemical analyzer

PUS-2018G Semi-automatic biochemical analyzer

Product ID:SHLCshfx004

Price: Please inquire PDF Format
Supply Ability:20SETS/MON
Port:SHENZHEN
share:
  • Product Introduction
  • Consulting
  • Model NumberPUS-2018G
    Brand NameYM
    Payment TermsT/T, paypal
    1.Technical Specifications
    1) Display: 240 × 128 LCD display;
    2) Printer: External inkjet printers or Built-in thermal printer
    3) Cuvette: 32ul/1cm titanium / quartz movement colorimetric cell;
    4) Light source: 20W/12V quartz halogen tungsten lamp;
    5) wavelength range (nm) :300-800; Detection range: -0.100 ~ 3.500;
    6) Output Resolution (A): 0.001;
    7) detection temperature (°C): 25,30,37;
    8) configured filter: 340,405,492,510,546,578,600, 630, a total of 8 wavelengths (up to 9 filters configuration);
    9) Weight:       9 kg
    10) Dimensions:  450mm×305 mm×185 mm
    2. Technical requirements
    1) The filter center wavelength accuracy: ± 2, half-width 8nm± 1 (340nm half-width 10nm ± 1)
    2) Stray light: with sodium nitrite standard solution was measured at a wavelength of 340 nm, the absorbance of not less than 2.3A (equivalent to the stray light ≤ 0.5%.)
    3) The absorbance of linear: absorbance range of 0.000 to 0.500 when the bias of ± 3.0%, absorbance in the range ≥ 0.500 ~ 2.000 when the bias of ± 1.0%;
    4) Repeatability: instrument measuring the absorbance coefficient of variation of repeated CV ≤ 0.5%;
    5) Stability: Instrument stability of absorbance ≤ 0.005A/20min;
    6) Temperature accuracy: test solution temperature is 37 °C, 30 °C, 25 °C, the accuracy is ± 0.1 °C, fluctuations in value of less than 0.3 °C
    7) cross contamination: the instrument cross-contamination rate of ≤ 0.5%.
    3. The main function
    1) Operation display: equipment used in English operating system;
    2) self-examination: Power On Self Test function instrument has, boot the system if it detects a fault, will be displayed on the LCD screen prompts the user;
    3) Select the filter: Test items filter required by the instrument automatically selects the settings according to the procedure;
    4) Input method: input through the membrane keyboard;
    5) Input function: to enter the case letters and numbers;
    6) examines the project settings: Can set, save and query parameters of 100 test items ,Call for future detection
    7)Detection Method: Equipment can be a light absorption, the end method, dynamic method, two-point method, the standard curve method, the control factor method and tube method of detection
    8) storage test results: up to 200 test results stored
    9)Means of communication: with RS-232 communication port, It can communicate with the company's special software
    10) Injection mode: A single injection

     
  • 1) Display: 240 × 128 LCD display;

    2) Printer: External inkjet printers or Built-in thermal printer

    3) Cuvette: 32ul/1cm titanium / quartz movement colorimetric cell;

    4) Light source: 20W/12V quartz halogen tungsten lamp;

    5) wavelength range (nm) :300-800; Detection range: -0.100 ~ 3.500;

    6) Output Resolution (A): 0.001;

Products
Analytical instruments
Physical property test
Environmental monitoring and analysis
Lab general equipment
About us
About this website
Our service
Product purchase
Contact Us

Newsletter

Make Sure you dont miss interesting happenings by joining our newsletter program.

Contact Us
+86-18620722006
instruments@instrumentstrade.com