Introduction PB - 150 type Pb tester is using monochromatic cold light source, using microcomputer automatic processing data, shows that the water samples of lead density directly. It was widely used in drinking water, surface water, surface water, sewage and industrial wastewater. Features: 1, the use of imported high performance, long life (100000 hours), high brightness light source, with narrow band filter system, optical stability is extremely strong, less susceptible to interference of light, and therefore instrument of high precision and good stability.2, large screen LCD display in Chinese, Chinese menu operation, simple and intuitive.3, measurement data can be stored permanently, working curve, besides the factory calibration curve also allow users to calibration curve.4, after the host chassis by ABS material, good anticorrosive property.5, adopt high performance and low power 16-bit single chip microcomputer system, excellent performance. Technical parameter Measuring range: 0.01 ~ 0.30 mg/L Mistake: ≤5% Repeatability: ≤3% Optical stability: instrument absorbance value within 20 min drift is less than 0.002 A Dimension: the host 266 mm * 200 mm * 200 mm weight≤1 kg TDPB - 150 type Pb tester normal conditions of use: (1) the environment temperature: 5 ~ 40 ℃ (2) relative humidity: 85% or less (3) power supply: AC 220 (plus or minus 22) V.(50 + / - 0.5 Hz) (4) no significant vibration and electromagnetic interference, avoid direct sunlight. PB - 150 type lead tester configuration list: 10 host 1, reaction tubes, color plate 2, only 1 set of reagent, the power cord 1 root, and the certificate of approval of manual, warranty card, one copy each.
Introduction PB - 150 type Pb tester is using monochromatic cold light source, using microcomputer automatic processing data, shows that the water samples of lead density directly. It was widely used in drinking water, surface water, surface water, sewage and industrial wastewater.
