Introduction: OM-800P high and low temperature spray dryer and its main application in universities, research institutes and food and pharmaceutical industry laboratories to produce micro-particle powder, broad-spectrum applicability to all solutions such as emulsions and suspensions, suitable for heat The drying of sensitive substances such as biological products, biological pesticides, enzyme preparations, etc., because the materials ejected are only subjected to high temperature when sprayed into mist-sized particles, so they are only heated instantaneously, and the active materials can be maintained after drying. Its active ingredients are not destroyed. This type of spray dryer can achieve spray drying at normal temperature. Features: 1. Breakthrough structure, full molecular sieve patented honeycomb runner design. 2. The runner has a built-in high molecular sieve. 3. Ultra low value consumables. 4. Dry wind energy reaches an ultra-low dew point below -30~70 °C. 5. The P.I.D temperature control system can be used to display the regeneration temperature and the low dew point return air temperature. 6. Motor reverse phase and overload protection. 7. Over temperature alarm, fault shutdown and display function. 8. The original control products are brand-name products such as Omron, Siemens and Fuji. 9. Simple and compact structure, easy maintenance and low failure rate. 10. Appearance powder coating paint, bright and generous. 11. Color LCD touch screen parameter display: air inlet temperature / air outlet temperature / peristaltic pump speed / air volume / pin frequency. 12. Full-automatic control: one-button start-up, after setting the spray process parameters, the temperature reaches the predetermined temperature, the peristaltic pump starts itself, the running animation is displayed on the touch screen, and the running process is clearly displayed; when the machine is shut down, just press the stop button, the machine is automatically safe. Shut down. 13. Manual control: If the process parameters need to be adjusted during the experiment, it is convenient to switch to the manual state. The color touch screen dynamic display (animation) throughout the experiment process. Technical Parameters: Air volume: 60 cubic meters / hour Drying fan power consumption: 0.4kw Regenerative fan power consumption: 0.2kw Regenerative electric heating power consumption: 2.4kw Inlet air temperature control: 20-180° (adjustable) (can be dried at low temperature, can be dried at high temperature, dual-purpose function) Outlet temperature control: -30 °C ~ 60 Evaporation water volume: 1500mL / H ~ 2000ml / h Maximum feed amount: up to 2000ml/h (adjustable) Feeding mode: peristaltic pump adjustment Minimum feed: 50mL Temperature control accuracy: ±1 °C Average drying time: 1.0 to 1.5S Machine power: 4.5KW / 380V
Introduction: OM-800P high and low temperature spray dryer and its main application in universities, research institutes and food and pharmaceutical industry laboratories to produce micro-particle powder, broad-spectrum applicability to all solutions such as emulsions and suspensions, suitable for heat The drying of sensitive substances such as biological products, biological pesticides, enzyme preparations, etc., because the materials ejected are only subjected to high temperature when sprayed into mist-sized particles, so they are only heated instantaneously, and the active materials can be maintained after drying. Its active ingredients are not destroyed. This type of spray dryer can achieve spray drying at normal temperature.
