Introduction: NWC-2 Viscometer is a new type of equipment developed and produced by our company according to the needs of product inspection and testing according to the needs of production and scientific research of synthetic fiber, plastic rubber and petrochemical industry. It has two functions of cooling and heating, Requirements, high degree of automation, high precision temperature control, viscosity detection convenience. NWC-2 Viscometer, consists of precision thermostat bath and viscometer and timing mechanism. Precision thermostat with digital display, continuous display of the actual temperature thermostat bath, digital resolution, temperature distribution and fluctuations are controlled within ± 0.01 ℃, 92 years since the industrialization of scientific research so far, is still high accuracy, Full-featured thermostat bath, for the implementation of ASTM, ISO, JIS and other international standards and new national standards to create the conditions. Features: 1. Precision thermostat with a refrigeration system composed of compressed refrigeration units, regardless of the ambient temperature, can be easily obtained below room temperature thermostat requirements, not only to ensure the use of the hot season, but also to ensure that still has at low temperatures High precision, and no low-temperature semiconductor cooling technology produced by the low efficiency, we must ensure that a certain pressure of cold water sources and other defects. 2.NWC-2 viscosity meter, paint the body, stainless steel surface, handsome in appearance, easy to operate. Press the power switch, the thermostat in the microcomputer system under the control of the machine, that is, automatically according to the preset temperature for constant temperature; LED on the panel indicates the machine heating, both sides of the thermostat are equipped with a large area of the observation window , Through the back of the background light box white light source, can clearly observe the viscometer solvent flow within the capillary solution. 3. Viscometer and timing mechanism, allows users to easily hold the viscometer, and can easily visually adjust the vertical capillary, the operator presses the corresponding station timing button, which can achieve timing, easy to operate. Specifications: Temperature range: 0 ~ 70 ℃ Temperature resolution: 0.01 ℃ Fluctuation temperature: ± 0.01 ℃ (room temperature ± 30 ℃) Trough temperature distribution: ± 0.01 ℃ (room temperature ± 30 ℃) Digital correction: <0.1 ℃ Timing range: 0 ~ 999.99s Timing resolution: 0.01s Timing accuracy: 0.2s / 999s Thermostatic tank volume: 30L Studio size: 32cm × 29cm × 34cm (length × width × height) Ambient temperature: room temperature Power: 220V 10A 50Hz Theoretical cooling capacity: 250kcal / h Heater power: 1kW Observation window size: 23cm × 27cm Overall dimensions: 72cm × 35cm × 61cm (length × width × height)
Introduction: NWC-2 Viscometer is a new type of equipment developed and produced by our company according to the needs of product inspection and testing according to the needs of production and scientific research of synthetic fiber, plastic rubber and petrochemical industry. It has two functions of cooling and heating, Requirements, high degree of automation, high precision temperature control, viscosity detection convenience. NWC-2 Viscometer, consists of precision thermostat bath and viscometer and timing mechanism. Precision thermostat with digital display, continuous display of the actual temperature thermostat bath, digital resolution, temperature distribution and fluctuations are controlled within ± 0.01 ℃, 92 years since the industrialization of scientific research so far, is still high accuracy, Full-featured thermostat bath, for the implementation of ASTM, ISO, JIS and other international standards and new national standards to create the conditions.
