Introduction: Portable sample concentrator NAI-BNS-12 This product is equipped with a digital display head, with temperature design function and auxiliary heating function, and comes with an air source, high-quality SUS304 stainless steel as an air cavity, exquisite production, compact size, easy to carry, with heating The temperature is uniform, the noise is low, the air volume is large, and the sample can be quickly concentrated in a short time. It is suitable for the rapid concentration of the sample in any environment. experiment procedure: 1. Open the portable carrying case, check whether the instrument is intact, and connect the power supply. 2. Adjust the height of the bracket so that it does not touch the sample addition liquid surface (1cm). 3. Set the temperature according to the electronic component manual, and then turn on the heating switch. 4. After the temperature rises to the set temperature, remove the bracket, put the test tube containing the solution to be concentrated into the sample chamber, and adjust the position of the blower tube to be about 1 cm above the liquid level of the test tube. 5. Turn on the air source switch and press the blow button. 6. After the sample concentration is completed, turn off the heating switch and the blower switch in sequence, and remove the test tube. 7. After the temperature of the sample chamber has dropped to room temperature, restore the instrument to the operating state. Technical Parameters 1. Number of sample holes: 12 holes 2. Diameter: 16.5mm 3. Hole depth: 56mm 4. Air source: air source 5. Heating method: dry bath 6. Temperature error: ≤ ± 0.3 ℃ 7. Heating range: room temperature-100 ℃ 8. Flow rate: 0-36L / min (adjustable) 9. Maximum power: 200W 10. Size: 260 * 190 * 240mm 11. Safety: Intrinsically safe for organic solvents
Introduction: Portable sample concentrator NAI-BNS-12 This product is equipped with a digital display head, with temperature design function and auxiliary heating function, and comes with an air source, high-quality SUS304 stainless steel as an air cavity, exquisite production, compact size, easy to carry, with heating The temperature is uniform, the noise is low, the air volume is large, and the sample can be quickly concentrated in a short time. It is suitable for the rapid concentration of the sample in any environment.
