Introduction: The parallel concentration evaporator concentrates the batch samples under reduced pressure/heating/vortexing conditions to achieve rapid concentration of multiple samples. It can be combined with various sample pretreatment equipment such as solid phase extraction equipment and fully automatic cable extractor. The parallel concentration evaporator is under mild conditions. The basic principle is to quickly evaporate or quantify multiple samples by simultaneous heating/decompression/vortex oscillation, effectively avoiding the damage of high temperature to certain targets. No need for operator supervision, high degree of automation. Parallel Concentration Evaporator B series has expanded its functions based on the performance of A series instruments, making it more suitable for fast-paced and high-efficiency experimental needs. Characteristics 1. Batch processing samples, single-concentration of 6 samples, significantly improve the efficiency of the experiment; 2. Individual samples are sealed independently to strictly eliminate cross-contamination; 3. The water bath is transparent, and the concentrated state can be observed at any time for convenient operation; 4. Specially designed automatic quick change valve for quick change function. After the concentration of a single sample is completed, the new sample can be removed at any time without affecting the concentration of other samples, and it is convenient to process different samples; 5. Gradient temperature control system, and with gradient pressure control system, no need for operators to take care of, more complex samples are processed; 6. The instrument is small in size and can be placed in a fume hood. The solvent recovery rate is high, reducing environmental pollution and injury to the experimenter; 7. Concentrate the sample by simultaneous heating/vortexing/vacuuming, the water bath is uniform, the concentration is fast and the bump is effectively prevented. Technical Parameters Batch processing samples: 6 digits, suitable for 50-200ml test tubes to meet different experimental needs Centrifugal rate: 5mm Speed: 0-600rpm Heating temperature range: room temperature +5 ° C ~ 100 ° C Temperature control accuracy: ±0.5 °C Heating method: PTC water bath heating Upper cover heating function: speed up the concentration and prevent condensation from flowing back Host gradient temperature control, 5 programs can be set Test tube seal: single test tube is sealed independently, cross-contamination
Introduction: The parallel concentration evaporator concentrates the batch samples under reduced pressure/heating/vortexing conditions to achieve rapid concentration of multiple samples. It can be combined with various sample pretreatment equipment such as solid phase extraction equipment and fully automatic cable extractor. The parallel concentration evaporator is under mild conditions. The basic principle is to quickly evaporate or quantify multiple samples by simultaneous heating/decompression/vortex oscillation, effectively avoiding the damage of high temperature to certain targets. No need for operator supervision, high degree of automation. Parallel Concentration Evaporator B series has expanded its functions based on the performance of A series instruments, making it more suitable for fast-paced and high-efficiency experimental needs.
