MT-2H Double Head Automatic Hot Embedding Machine Introduction: MT-2H is a dual head automatic hot setting machine suitable for hot forming of different materials, such as epoxy resin, electric wood powder, acrylic powder, etc. Adopting a dual sleeve design, the left and right sleeves can be controlled separately to meet the batch embedding requirements of samples of different sizes. characteristic: 1. Sliding cap, easier and safer to operate; 2. Low operating noise and small overall size; 3. 7-inch touch screen, simple interface, easy to use; 4. Real time display of temperature and pressure changes; 5. LED light strip indicates the operating status; 6. Can store multiple sets of operating parameters. Technical parameters: 1. Model: MT-2H 2. Electrical Power supply: 220V, 50HZ Power: 4.0Kw 3. Sample Dimensions: 30mm (standard), 25.4, 32, 40, 50 (or customized) Maximum height: 60mm 4. Heating Heating range:~200 ℃ Protection time: 0-30 minutes Heating location: circular around the perimeter 5. Pressurization: Pressure range 0-300Bar (depending on the size of the sleeve) 6. Cutting Platform Journey: 100mm Size WxD: 350x370mm 7. Cooling Cooling method: Automatic mode: by time/temperature; Manual mode Cooling rate: high, medium, and low cooling rates Inlet pipe diameter: OD=Φ 8mm, quick plug type, water pressure<0.3MPa Outlet pipe diameter: ID=Φ 12mm, pagoda shaped joint 8. Control panel: 7-inch touch screen 9. Inlaid sleeve: 2 10. Noise measured at 1 meter:<60dB 11. Operating environment Temperature: -20 ° C -60 ° C Humidity: 0-95% RH 12. Dimensions W × D × H: 660x500x550mm 13. Weight: 58kg
Introduction: MT-2H is a dual head automatic hot setting machine suitable for hot forming of different materials, such as epoxy resin, electric wood powder, acrylic powder, etc. Adopting a dual sleeve design, the left and right sleeves can be controlled separately to meet the batch embedding requirements of samples of different sizes.
