Introduction: The HXQ-50 automatic hot inlaying machine is suitable for the inlaying of specimens with irregular shape or size, so as to meet the subsequent sample preparation steps and obtain the required detection plane. Therefore, this machine is one of the necessary equipment in the metallurgical laboratory. Features: 1, with the function of cooling water. 2, for all materials hot mosaic. 3, set the heating temperature, holding time, pressure and other parameters, can automatically complete the mosaic work, without operator guards. 4, according to the different requirements of the sample selected to replace the four specifications of the mold, can also be inlaid with two samples of the same specifications, to make the preparation more efficient. Technical Parameters: Power supply: 220V Power: 1000W Mould specification: Ø25mm, Ø30mm, Ø40mm, Ø50mm Temperature: 30°C-180°C Pressure: 200-2000KPa Holding time: 1min-900min Cooling: water cooling, setting range: 1 - 900min, temperature value dropped to 50 °C automatically enter the "cooling time" countdown Size: 600mm × 490mm × 550mm; Weight: 100kg Standard accessories Mold: 1 set Funnel: 1 Mosaic material: 1 bag Allen wrench: 1 set
Introduction: The HXQ-50 automatic hot inlaying machine is suitable for the inlaying of specimens with irregular shape or size, so as to meet the subsequent sample preparation steps and obtain the required detection plane. Therefore, this machine is one of the necessary equipment in the metallurgical laboratory.
