Brief introduction: The mrauto-w-400l automatic oil filtration system, based on more than 20 years of filtration experience of mingrui filtration, adopts unique polymer material filter elements, and the whole machine realizes automatic control. After filtration, the oil is transparent, with high recovery rate, and the system is stable. Mainly used in high-precision lathe, grinding machine oil filtration, can recover metals such as tungsten powder in oil. Advantage: 1. Improve the oil recovery rate. The single equipment can return oil to more than 200 cubic meters per day, greatly reducing the cost caused by the replacement of grinding oil. 2. The grinding oil contains a large number of metal particles, which can recover certain economic costs after being recovered by this filter system. 3. After using the filter, it reduces the influence of fine impurities on the precision of the grinding machine and increases the product quality. 4. Include cooling module to reduce the influence of thermal expansion and cold shrinkage on the accuracy of grinding machine. 5. Compared with similar products, the filter system is operated without interruption with low failure rate and easy to replace the filter core. 6. Less waste oil discharge can reduce waste treatment cost. Function: Advanced high-pressure back-flushing design, the use of modular equipping, dirty by high-pressure pump into filter barrels of oil began filtering, using nanometer high precision filter, filtering precision can reach NAS1638 magnitude 7, can automatic backwash, will be attached to the filter on the tungsten mud emissions to tungsten mud collecting basket, 1 to 2 months after recycle resale, filter out the clean oil directly into the refrigeration system, 100% of refrigeration, the oil temperature can be controlled in plus or minus 0.5 ℃, This set of equipment has a maximum flow rate of 120 liters/min. A large amount of oil mist is produced during the grinding process of the machine tool. The oil mist is purified by the electrostatic oil mist machine, which meets the national emission and standards. The hot oil filtered by the filter barrel can be directly sent to the refrigeration loop to produce refrigeration, which can guarantee the stability of oil temperature. Technical parameters: Model: MRAUTO - W - 400 L Flow rate: 400L/min, which can meet the requirements of 3-4 high-precision grinding machines. Inlet and outlet pipe diameter: DN150 flange Oil quality: NAS 1638 (1963) is iso4406-1987-16/13 The oil outlet temperature: 5 ~ 28 ℃ is adjustable Cleaning time: 0S, continuous work without cleaning time External dimension: 3000mm (length) *1850MM (width) *1500 (height) Control method: PLC+ touch screen panel operation, automatic manual mode can be switched Power distribution: 380 three-phase 50-hz Power: 7.5 ~ 15 kw Sludge basket size: 1200MM (length) * 800MM (width) *300MM (height)
Brief introduction: The mrauto-w-400l automatic oil filtration system, based on more than 20 years of filtration experience of mingrui filtration, adopts unique polymer material filter elements, and the whole machine realizes automatic control. After filtration, the oil is transparent, with high recovery rate, and the system is stable. Mainly used in high-precision lathe, grinding machine oil filtration, can recover metals such as tungsten powder in oil.
