Model 1089a exhaust gas 5-in-1 sampling tube Introduction: The 1089a exhaust gas 5-in-1 sampling tube is used for the collection of pollutants such as hydrogen chloride, sulfuric acid mist, fluoride, hydrogen fluoride and hydrogen bromide in the fixed pollution source. The whole process is heated and controlled, and the flow rate and smoke temperature measurement interface are reserved. The host realizes the measurement of the flow rate and the temperature of the smoke. The main body of the sampling tube is made of titanium metal, which is light in weight and corrosion-resistant. The gas path is made of PTFE material, which effectively reduces the adsorption of the sample gas. It can be used together with the corresponding sampler. Executive standard HJ67-2001 Determination of Fluoride in Atmospheric Fixed Pollution Sources Ion Selective Electrode Method HJ544-2016 Fixed source of waste gas Determination of sulfuric acid mist Ion chromatography HJ548-2016 Fixed source of waste gas Determination of hydrogen chloride Silver nitrate volumetric method HJ549-2016 Ambient air and exhaust gases Determination of hydrogen chloride Ion chromatography Features: 1. The main body of the sampling tube is made of titanium, which is light in weight and corrosion resistant. 2. The gas path is made of PTFE material, which effectively reduces the adsorption. 3. The filter membrane or the filter cartridge and the sampling tube are heated throughout the whole process, the system automatically controls the temperature, the temperature control range is wide, and the temperature control is uniform and accurate. 4. The special structure design of the incubator can realize the horizontal direction (0~360)° and the vertical direction (0~90)° rotation, which can meet the requirements of 5. horizontal or vertical measurement conditions. 6. Can measure flue gas flow rate and flue gas temperature while sampling 7. Equipped with a series of sampling nozzles to enable the collection of different flow rates to be met
Introduction: The 1089a exhaust gas 5-in-1 sampling tube is used for the collection of pollutants such as hydrogen chloride, sulfuric acid mist, fluoride, hydrogen fluoride and hydrogen bromide in the fixed pollution source. The whole process is heated and controlled, and the flow rate and smoke temperature measurement interface are reserved. The host realizes the measurement of the flow rate and the temperature of the smoke. The main body of the sampling tube is made of titanium metal, which is light in weight and corrosion-resistant. The gas path is made of PTFE material, which effectively reduces the adsorption of the sample gas. It can be used together with the corresponding sampler. Executive standard HJ67-2001 Determination of Fluoride in Atmospheric Fixed Pollution Sources Ion Selective Electrode Method HJ544-2016 Fixed source of waste gas Determination of sulfuric acid mist Ion chromatography HJ548-2016 Fixed source of waste gas Determination of hydrogen chloride Silver nitrate volumetric method HJ549-2016 Ambient air and exhaust gases Determination of hydrogen chloride Ion chromatography
