MIK-3051LT Single flange liquid level transmitter Introduction: The MIK-3051LT single flange pressure transmitter is a new type of transmitter produced by our company with advanced foreign technology and equipment. The key raw materials, components, and parts are all imported, and the entire machine has undergone strict assembly and testing. This product has the characteristics of advanced design principles, complete variety and specifications, and easy installation and use. Features: 1. Wide compatibility with media: liquid pressure such as water and oil, gas pressure such as air and steam, viscosity, easy crystallization, etc., all compatible and adjustable in range, with a wide range. 2. High measurement accuracy: Imported sensing components are used internally, with a measurement accuracy of up to level 005 and strong anti-interference ability, effectively improving the accuracy and reliability of measurement. 3. LCD display screen: Adopting LCD large screen backlight display, the on-site reading is clearer 4. Stainless steel shell: Made of 316L stainless steel joint and 316L stainless steel double diaphragm, with long-term corrosion resistance and better contact performance 3. Imported sensing components: Imported sensing components are used internally, with a measurement accuracy of up to 0.075 level, and support for one click switching of multiple international units Technical parameters: Product model: MK3051LT Measurement parameters: differential pressure, liquid level Measurement range: Lower limit: Starting from 100% URL (continuously adjustable) Upper limit value: up to+100% URL (continuously adjustable) Output signal: 2-wire system, 4-20mADCHART output, digital communication, ART protocol loaded on 4-20mADC signal Output signal limit: min=3.9mA, maX=20.mA response time The damping constant of the amplifier component is 0.1s; The time constant for sensors and remote transmission flanges is 0.2-6s (Depending on the sensor range, range ratio, capillary length, and viscosity of the filling liquid) Environmental temperature: Minimum: depends on the filling fluid; Maximum: 85 ℃ When equipped with liquid crystal display fluororubber sealing ring, 20~65 ℃ Storage temperature/transportation temperature: minimum: depends on the filling liquid, maximum: 85 ℃ Relative humidity: 0-100% Impact resistance acceleration: 50g, duration: 11ms Anti vibration: 2g to 500Hz Medium temperature: 30-400 ℃ Rated pressure of remote transmission flange: ANS1 standard: 150psi~600psi DN standard: DN16MPa~PN10MPa Weight: Bilateral remote transmission is about 10-165kg for DN5012 "and about 12-18kkg for DN80/3", DN4 is approximately 14-21kg. Unilateral remote transmission is DN5012 ", approximately 7-10kg, DN80/3 "approximately 8-11kg, DN4" approximately 9-12kg Explosion proof performance: NEPSI explosion-proof license: Exd Ⅱ CT6; NEPSl intrinsic safety license: Exia II CT4 (allowable operating temperature: 40C~659C) Electrical connection: M20X1.5 cable sealing buckle, wiring terminal suitable for wires of 0.5-2.5mm. Shell protection level: IP67
Introduction: The MIK-3051LT single flange pressure transmitter is a new type of transmitter produced by our company with advanced foreign technology and equipment. The key raw materials, components, and parts are all imported, and the entire machine has undergone strict assembly and testing. This product has the characteristics of advanced design principles, complete variety and specifications, and easy installation and use.
