MIK-1158S wall mounted ultrasonic flowmeter Introduction: The MIK-1158S wall mounted ultrasonic flowmeter utilizes the principle of low voltage and multi pulse time difference, and adopts high-precision and ultra stable dual balanced signal differential transmission and differential reception digital detection technology to measure the transmission time of sound waves in the upstream and downstream directions. The flow rate is calculated based on the time difference. With a very simple installation method, there is no need to break the pipe or stop water, making it easy for customers to achieve flexible pipeline flow measurement. The product can also be equipped with installation fixtures, which do not require daily maintenance and provide reliable and drift free measurements for a long time. It adopts advanced digital correlation technology and intelligent adaptive sound wave technology, which makes its measurement stability more prominent. At the same time, it uses sound focusing technology to significantly enhance the signal reception quality of the product during continuous measurement. Features: 1. SMT fully automatic SMT circuit ensures high-quality product performance and low maintenance rate 2. Full menu software design, through which parameters or types such as pipe diameter, pipe material, wall thickness, and output signal can be easily set 3. Can automatically memorize positive and negative net cumulative flow 4. Electrical isolation 0-20MA or 4-20MA current loop output 5. Isolate DC8-36V or AC85-264V multi-channel input and output Technical parameters: Product model: MIK-1158S Applicable diameter: DN32-6000mm Applicable media: relatively pure liquids such as tap water, alcohol, and seawater Power supply method: isolated DC8-36V or AC85-264V Accuracy level: indication ± 1%, flow rate greater than 0.2m/s Measurement units: meters, feet, cubic meters, liters, cubic feet, US gallons Applicable pipes: uniform medium pipes such as carbon steel, stainless steel, cast iron, copper, PVC, aluminum, fiberglass, etc Power consumption: Working current 50mA (without connecting the keyboard and buzzer) Accuracy: 1% of measured value Communication method: RS485, supports MODBUS protocol Key: 16 keys Other functions: can automatically memorize positive and negative net cumulative traffic Optional output: 1 isolated RS485 output 1 isolated 4-20mA or 0-20mA output (active or passive optional) Dual isolated OTC output (OTC1 pulse width programmable between 6-1000ms, default 200ms)
Introduction: The MIK-1158S wall mounted ultrasonic flowmeter utilizes the principle of low voltage and multi pulse time difference, and adopts high-precision and ultra stable dual balanced signal differential transmission and differential reception digital detection technology to measure the transmission time of sound waves in the upstream and downstream directions. The flow rate is calculated based on the time difference. With a very simple installation method, there is no need to break the pipe or stop water, making it easy for customers to achieve flexible pipeline flow measurement. The product can also be equipped with installation fixtures, which do not require daily maintenance and provide reliable and drift free measurements for a long time. It adopts advanced digital correlation technology and intelligent adaptive sound wave technology, which makes its measurement stability more prominent. At the same time, it uses sound focusing technology to significantly enhance the signal reception quality of the product during continuous measurement.
