Introduction: The MIC-OR-860F2 building type optical receiver is a product designed by us for the FTTB application of CATV network. It is compact and easy to install. It has AGC function, when the input optical power is -8~+1dBm. The output level remains unchanged and has high performance indicators. The remote control of the output level and slope of the machine can be realized completely through the network management system, making CATV network engineering debugging extremely convenient; simultaneous transmission of digital and analog Signal is the mainstream model of FTTB network system construction. Features: 1. 1310nm and 1550nm dual window reception; 2. 1000MHz RF output bandwidth; 3. The LED digital tube displays the working parameters (optical power, attenuation, equalization, output level, voltage, temperature) of the machine in real time; 4. Press the button to adjust the RF output level and slope; 5. The output is output for two ports, and has a -20dB test port for easy engineering debugging; 6. The light control AGC function keeps the output level unchanged when the input optical power is -8~+1dBm; 7. The network management complies with the national standard GB/T20030-2005 "HFC network equipment management system specification"; 8. Perfect surge suppression circuit can effectively prevent surge shock and lightning strike; 9. Low power design, the whole machine power consumption is less than 6.0W; 10. High-quality miniaturized cast aluminum casing, good dustproof, shielding and heat dissipation performance, easy to install. Technical Parameters: RF output port: 2 Receiving light wavelength nm: 1290~1600 Optical connector form: FC/APC or SC/APC Input optical power range dBm: -9~+2 Light control AGC input range dBm: -8~+1 Light reflection loss dB: ≥45 In-band flatness dB: ±0.75 RF frequency range MHz: 47~1000 RF output level dBμV: ≥100 RF output impedance Ω: 75 Attenuation adjustment range dB: 0~16 Balance adjustment range dB: 0~16 Output reflection loss dB: >16 (47~550MHz); >14 (550~1000MHz) Optical link carrier-to-noise ratio C/N dB: >51@ -1dBm Optical link carrier combination third-order beat ratio C/CTB dB: >63@ -1dBm Optical link carrier combination second-order beat ratio C/CSO dB: >60@ -1dBm Power supply voltage V: AC110 ~ 240V / DC6V Network management type: II network management Working temperature °C: -40~+60 Operating humidity %: 20~90 (non-condensing) Power consumption W: 6.0 Dimensions mm: 182 × 125 × 36
Introduction: The MIC-OR-860F2 building type optical receiver is a product designed by us for the FTTB application of CATV network. It is compact and easy to install. It has AGC function, when the input optical power is -8~+1dBm. The output level remains unchanged and has high performance indicators. The remote control of the output level and slope of the machine can be realized completely through the network management system, making CATV network engineering debugging extremely convenient; simultaneous transmission of digital and analog Signal is the mainstream model of FTTB network system construction.
