1 MIC-HE two / three series of EPON ONU

MIC-HE two / three series of EPON ONU

Product ID:HZGDglcsfp010

Price: Please inquire PDF Format
Supply Ability:600 SETS/MON
Port:SHENZHEN
share:
  • Product Introduction
  • Consulting
  • Brand NameSHANXIMAIKE
    Payment TermsT/T, paypal
    Model NumberMIC-HE two / three series
    MIC-HE two / three series of EPON ONU
     
    Introduction:
    MIC-HE series ONU is a broadband access market based on EPON technology. It is designed to meet the needs of broadcasting and television operators for broadband access and FTTH fiber-to-the-home. It integrates CATV optical receivers to realize broadband and CATV networks. Converged passive optical network terminal products. It is based on mature, stable and cost-effective Gigabit EPON technology, which combines Gigabit Ethernet switching technology and FTTH optical receiving technology. It has high reliability, easy management and good quality of service (QoS) guarantee. The technical performance of the device meets the requirements. IEEE802.3ah, China Telecom EPON equipment technical requirements (V2.1) and other specifications.
    MIC-HE series ONU is an ONU product that combines CATV optical receiving function, which provides EPON-based fiber access and CATV optical receiving function based on FTTH network architecture. It acts as one EPON interface and one HFC light. Interface, the client has 4 Ethernet interfaces and 1 RF interface.
    MIC-HE series ONU has built-in 4-port 100M wire-speed switch function, high bandwidth, stable performance, complete software functions, suitable for various application scenarios, and can meet FTTB (fiber to the building), FTTU (fiber to unit), FTTO (fiber To the desktop), FTTH (fiber to the home) and other application needs.
    Features:
    1. Single-fiber or dual-fiber access, providing broadband and CATV services;
    2. WIFI function is optional;
    3. The EPON part complies with the IEEE802.3ah standard and China Telecom EPON technical requirements V2.1/V3.0;
    4. Transmission distance 20KM, support data encryption;
    5. Rich VLAN and multicast functions;
    6. Different data ports are isolated from each other;
    7. Support OAM remote configuration management;
    8. Good interoperability with third party OLT platforms;
    9. Plug and play, with automatic discovery, automatic configuration, automatic upgrade and other functions;
    10. Support our company's SNMP-based network management platform EMS unified network management.
    Technical Parameters:
    model
    project
    Performance parameter
    MIC-HE1204 MIC-HE1304 MIC-HE2204 MIC-HE2304
    Optical access method Single fiber Single fiber Double fiber Double fiber
    CATV receives light wavelength 1550 +/- 10nm 1550 +/- 10nm 1290~1610nm 1290~1610nm
    WIFI function No yes no yes
    CATV channel Light reflection loss: >45dB
    Optical input power: -8dBm ~ +2dBm
    RF frequency: 47~1000MHz
    RF output level: 72dBuv @-8dBuV
    CNR: 46dB
    CSO: 65dB
    CTB: 65dB
    RF output reflection loss: 14dB
    RF impedance: 75Ω
    PON channel Meets the 1000BASE-PX20 standard
    Up and down symmetrical 1.25Gbps rate
    SC single mode single fiber, transmission distance: 20KM
    Support maximum split ratio: 1:64
    Wavelength: Send 1310nm, receive 1490nm
    Transmitted optical power: -1 to 4dBm
    Receive sensitivity: -27dBm
    Saturated optical power: -3dBm
    PON port throughput: downlink 950Mbps; uplink 930Mbps
    Ethernet port: 100Mbps
    Packet loss rate: <1*10E-12
    Transmission delay: <1.5ms
    User channel 4 10/100M adaptive Ethernet ports, full/half duplex
    RJ45 electrical port, support cross-connected adaptive, transmission distance 100 meters
    Two-layer line speed exchange
    Support VLAN TAG/UNTAG, VLAN conversion
    Supports port rate limiting, supports service prioritization, and supports broadcast packet suppression.
    Support loop detection
    1 CATV port, F head
    Power interface
    Management method
    Management function
     
    Dimensions
    weight
    Environmental parameters
    +12V DC power supply interface Configure external 12V 1A AC/DC power adapter
    Unified management by the central office OLT device through the OAM protocol, supporting SNMP, TELNET, local management
    Status monitoring, configuration management, alarm management, and log management
    200mm(L) x 140mm(W) x 33mm (H)
    Equipment weight: 0.4kg
    Working temperature: 0 ~ 50 ° C, storage temperature: -40 ~ 85 ° C
    Operating humidity: 10% to 90% non-condensing, storage humidity: 5% to 95% non-condensing
     
Products
Analytical instruments
Physical property test
Environmental monitoring and analysis
Lab general equipment
About us
About this website
Our service
Product purchase
Contact Us

Newsletter

Make Sure you dont miss interesting happenings by joining our newsletter program.

Contact Us
+86-18620722006
instruments@instrumentstrade.com