Performance features: Different optical system, fully sealed solid optical system, the spectral method, corresponding to the eight interference filter, every wavelength is independent of the signal processing circuit, measurement can be simultaneously, especially for the measurement with double wavelengths. Complete print way, instant printing on the determination results, summed up a print, or the same batch of samples after the determination of all projects, according to the portfolio of each specimen printing complete inspection report, enter the sample number and the results can also be used by the user to print out inspection report. Complete self - check function, after starting up the machine, the fault detection of the instrument system can be carried out, automatic prompt. The graphics liquid crystal display with large screen can display characters at the same time. The full Chinese display features a new operation help prompt function, which can print comprehensive report in Chinese. The software design is reasonable and the user can compile various biochemical test procedures. The memory system can store up to 200 test programs and carry out calculations. The reagent is completely open and can be used for import, domestic and self-dispensing reagent. Terminal real time clock display. Both the parameter results will not be lost when the battery is powered off. Separate the air automatically and avoid cross contamination. Technical indicators: Methods: the end point method (including absorbance, linear concentration and non-linear concentration, which can be measured with double wavelength), fixed time method (two-point method) and continuous monitoring method (dynamic method). Ending light source: 20W / 12V halogen lamp with a life of more than 3000 hours. The optical system: 340-800nm has eight built-in optical filters at 340, 380, 405, 492, 510, 546, 578 and 630nm, with a wavelength accuracy of plus or minus 2nm. Cycling absorbance range: 0-2.500Abs, resolution 0.001Abs. Ending cell: titanium alloy/quartz colorimetric cup, 10mm diameter, 26ul. Low temperature control system: PELTIER element temperature 25, 30, 32, 37 plus or minus 0.1 ℃. The measurement accuracy: the error is less than 1% and the drift is less than 2mAbs/hour. The internal 56 mm thermosensitive printer can print parameters, measurement curves, calibration curves and comprehensive reports. Ending keyboard: 24 key touch keyboard. Ending power supply: 220v plus or minus 15%, 50Hz, 70VA. Ending interface: standard RS232 serial port. Can connect to the central computer. Ending specification: 32 * 40 * 45cm.
Performance features: Different optical system, fully sealed solid optical system, the spectral method, corresponding to the eight interference filter, every wavelength is independent of the signal processing circuit, measurement can be simultaneously, especially for the measurement with double wavelengths. Complete print way, instant printing on the determination results, summed up a print, or the same batch of samples after the determination of all projects, according to the portfolio of each specimen printing complete inspection report, enter the sample number and the results can also be used by the user to print out inspection report. Complete self - check function, after starting up the machine, the fault detection of the instrument system can be carried out, automatic prompt. The graphics liquid crystal display with large screen can display characters at the same time. The full Chinese display features a new operation help prompt function, which can print comprehensive report in Chinese. The software design is reasonable and the user can compile various biochemical test procedures. The memory system can store up to 200 test programs and carry out calculations. The reagent is completely open and can be used for import, domestic and self-dispensing reagent. Terminal real time clock display. Both the parameter results will not be lost when the battery is powered off. Separate the air automatically and avoid cross contamination.
