MASTER10-M Fourier Transform Near Infrared Spectrometer
Introduction: MASTER10-M is specially designed for routine liquid transmission analysis in the laboratory. With S-Seq software, it can quickly analyze and detect liquid samples. The host also includes an external transmission temperature control module M-Cube, which is used for heating temperature control and sampling of liquid samples. The liquid sample is directly added to the sample tube or cuvettes with different optical path lengths with a dropper. The sample that needs to be heated and melted can also use the heating function of the M-Cube, and the spectrum will be collected after the sample becomes a uniform liquid sample. The S-Seq software is used for the daily analysis in the laboratory. After the experimental method and the quantitative model are set in the software, the user only needs to select the corresponding product category, enter the relevant product name/batch and other information, and measure the sample with one click , the content of each index predicted by the model can be obtained simultaneously within one minute. Multiple tests such as parallel samples can be carried out, and the average value can be directly given, and the operation is very simple. This set of configuration can be specially used for routine detection of daily indicators such as hydroxyl value / iodine value / acid value / saponification value in the chemical industry, and can also be used for rapid detection of related liquid samples in other industries. Features: 1. Conventional liquid transmission measurement 2. The external temperature control module can control the temperature of the sample, up to 150°C 3. Standard SMA905 interface 4. Laboratory application Technical parameter: Optical components: Gold-coated mirror, lens combination Temperature control range: room temperature to 150°C Outer diameter of sample vial: 8mm/22mm Light path of cuvette: 2mm/5mm/10mm Connection method: SMA905 interface Wavelength range: 4000-12500cm-1 (800-2500nm) Resolution: <2cm-1
Introduction: MASTER10-M is specially designed for routine liquid transmission analysis in the laboratory. With S-Seq software, it can quickly analyze and detect liquid samples. The host also includes an external transmission temperature control module M-Cube, which is used for heating temperature control and sampling of liquid samples. The liquid sample is directly added to the sample tube or cuvettes with different optical path lengths with a dropper. The sample that needs to be heated and melted can also use the heating function of the M-Cube, and the spectrum will be collected after the sample becomes a uniform liquid sample. The S-Seq software is used for the daily analysis in the laboratory. After the experimental method and the quantitative model are set in the software, the user only needs to select the corresponding product category, enter the relevant product name/batch and other information, and measure the sample with one click , the content of each index predicted by the model can be obtained simultaneously within one minute. Multiple tests such as parallel samples can be carried out, and the average value can be directly given, and the operation is very simple. This set of configuration can be specially used for routine detection of daily indicators such as hydroxyl value / iodine value / acid value / saponification value in the chemical industry, and can also be used for rapid detection of related liquid samples in other industries.