LS225 coating thickness gauge Introduction: The LS225 coating thickness gauge host is equipped with F500 probe, which is specially used for coating thickness detection on ferromagnetic metal substrates. In order to meet the accuracy requirements when measuring the thickness of extremely thin coating, users can also select a special hand pressure test frame. characteristic: 1. The design of ultra-small probe probe probe is adopted, which is especially suitable for coating measurement on small workpieces such as screws and bolts. 2. The probe adopts digital oscillation technology and high-speed ADC acquisition to ensure that the instrument has ultra-high stability and can measure ultra-thin coating. 3. It supports zero adjustment and multi-point calibration. It is equipped with 7 standard pieces of different thickness and size. According to the standard piece or the actual workpiece, the curve can be corrected to make the measurement data more accurate. 4. It has data statistics function, can store up to 9 measured values, and can automatically count the maximum, minimum, average and variance values of the measured data. 5. The probe design with high hardness can ensure the long-term and effective use of the instrument. 6. Provide special hand pressure test frame for users to choose, which can make measurement more convenient and eliminate measurement error caused by human factors, and the repeatability can reach 0.1 μ m。 Technical parameters: Display: 240 × 160 dot matrix LCD Power supply mode: 4 1.5VAAA alkaline batteries Operating temperature range: 0 ℃ - 50 ℃ Storage temperature range: - 20 ℃ - 60 ℃ Host size: 148 * 76 * 26mm Weight (including battery): 194g Measuring principle: magnetic induction Base material: ferromagnetic metal Measuring range: 0.0-500 μ m Resolution: 0.1 μ m:（0 μ m-99.9 μ m） one μ m:（100 μ m-500 μ m） Repeatability: ≤± (0.8% H+0.1 μ m) Hand pressure test rack test, H is the standard value Measurement accuracy: ± (2% H+0.3 μ m) Five point calibration, H is the standard value Company: μ m/mil Measurement interval: 1.5s (single mode) 0.4s (continuous mode) Minimum measuring area: Ø=7mm Minimum radius of curvature: 1.5mm for convex surface and 10mm for concave surface Minimum substrate thickness: 0.1mm User calibration: support zero point calibration, 1 to 5 point calibration Probe size: 110mm long × 15mm diameter (excluding connecting wire)
Introduction: The LS225 coating thickness gauge host is equipped with F500 probe, which is specially used for coating thickness detection on ferromagnetic metal substrates. In order to meet the accuracy requirements when measuring the thickness of extremely thin coating, users can also select a special hand pressure test frame.
