LS182 solar film tester Introduction: LS182 Solar Film Tester is a full-band explosion-proof membrane tester that can test SHGC (total solar transmittance). Infrared can be measured at 950nm, 1400nm and Full IR. It is suitable for all kinds of solar films and is the highest end of solar film test instruments. One. The test principle of the LS182 solar film tester is to use an ultraviolet light source, a visible light source and an infrared light source to illuminate the measured transparent substance, and the sensor respectively detects the incident light intensity of the light source and the light intensity after passing through the tested transparent substance, and the transmitted light intensity and The ratio of the incident light intensity is the transmittance, expressed as a percentage. Most solar films, visible light marked transmittance index, infrared and ultraviolet labeled barrier index, blocking rate = 100% - transmittance. The LS182 SHGC tester directly measures and displays the UV blocking rate, infrared blocking rate and visible light transmission for easy reading and understanding. Features: 1. It is suitable for the transmittance (barrier ratio) test of automotive film, explosion-proof film, architectural film, thermal film, film glass, etc. 2. Six parameters can be measured: ultraviolet, visible, infrared 950nm, infrared 1400nm, Full IR, SHGC. 3. Large color screen LCD display, infrared UV blocking rate display, reading is easy to understand. 4. Parallel light design, testing large thickness of foil glass, the data is equally accurate. 5. Applicable to solar film performance exhibition, production, quality inspection, inspection and other occasions. 6. The instrument has a real-time dynamic self-calibration function, which is automatically calibrated after power on. 7. 5V power supply, and has a USB interface, can be directly connected to the mobile power supply. 8. Patented product, patent number: 201320406828.8. Technical Parameters: UV: Peak wavelength 365nm Visible light: peak wavelength 550nm Infrared: Peak wavelengths 950nm, 1400nm and full infrared (Full IR) Resolution: 0.1% Measurement accuracy: better than ± 2% (colorless uniform light-transmitting material), factory standard sample detection is better than ± 1% Test slot size: width 47mm × depth 91 mm Instrument weight: about 590 grams Dimensions: length 216mm × height 134mm × width 29mm Power supply mode: 5V AC/DC power supply, can also be powered by mobile power (optional)
Introduction: LS182 Solar Film Tester is a full-band explosion-proof membrane tester that can test SHGC (total solar transmittance). Infrared can be measured at 950nm, 1400nm and Full IR. It is suitable for all kinds of solar films and is the highest end of solar film test instruments. One. The test principle of the LS182 solar film tester is to use an ultraviolet light source, a visible light source and an infrared light source to illuminate the measured transparent substance, and the sensor respectively detects the incident light intensity of the light source and the light intensity after passing through the tested transparent substance, and the transmitted light intensity and The ratio of the incident light intensity is the transmittance, expressed as a percentage. Most solar films, visible light marked transmittance index, infrared and ultraviolet labeled barrier index, blocking rate = 100% - transmittance. The LS182 SHGC tester directly measures and displays the UV blocking rate, infrared blocking rate and visible light transmission for easy reading and understanding.
