LS116 Transmittance Meter Upgrade Introduction: Light transmittance is an important technical indicator for many optical products, such as glass, solar film, and foil glass. The test principle of the light transmittance tester is to irradiate the measured substance with a visible light source, and the sensor respectively detects the incident light intensity of the light source and the light intensity after passing through the measured substance, and the ratio of the transmitted light intensity to the incident light intensity is transparent. Excess rate, expressed as a percentage. The LS116 Transmittance Tester adopts a parallel optical path design, which is suitable for detecting large thickness materials with an accuracy of ±1% or less. The light source conforms to the CIE Ming visual function standard and ensures the detection by the metrology institute. Features: 1. The light transmittance tester uses a parallel light path of the light source and a receiver concentrating design to enable measurement of large thickness materials. 2. Equipped with a fixed seat, it has two measurement methods; that is, it can be used for on-site measurement such as automobile front windshield, and it can be adapted to fixed-point transmittance measurement such as factory fixed station. 3. High-precision data acquisition, high measurement accuracy; fast speed and easy operation. 4. The instrument's transmittance measurement range is 0.001%-99.8%, which can test the transmittance of high permeability materials. 5. It is suitable for the transmittance test of glass products, solar film, foil glass, coating materials, organic material panels and other materials. The highest resolution is up to 0.001%. 6. LS116 Transmittance Tester is suitable for exhibitions, production, quality inspection, inspection and other occasions. Technical Parameters: Light source: 380nm-760nm full wavelength, in line with CIE Ming visual function standard Measurement accuracy: better than ±1% (colorless uniform light-transmitting material) Resolution: 0.001% (0% --- 10%) 0.01% (10% --- 100%) Sample measurement thickness: < 100mm Sample measurement diameter: > 10mm Weight: about 622 grams (without battery) Dimensions: Length 148mm * Width 76mm * Height 26mm Power supply: 4*AAA alkaline dry battery
Introduction: Light transmittance is an important technical indicator for many optical products, such as glass, solar film, and foil glass. The test principle of the light transmittance tester is to irradiate the measured substance with a visible light source, and the sensor respectively detects the incident light intensity of the light source and the light intensity after passing through the measured substance, and the ratio of the transmitted light intensity to the incident light intensity is transparent. Excess rate, expressed as a percentage. The LS116 Transmittance Tester adopts a parallel optical path design, which is suitable for detecting large thickness materials with an accuracy of ±1% or less. The light source conforms to the CIE Ming visual function standard and ensures the detection by the metrology institute.
