LS163A solar film tester Introduction: LS163A solar film tester is an instrument for measuring the optical properties of uniform transparent materials such as solar film, coated glass, thermal insulation glass, car side glass, etc. There are three display interfaces, which can display the transmittance separately, and also can display the barrier and transmittance at the same time. LS163A solar film tester is mainly applicable to various solar films, glass manufacturers, car 4S stores, car beauty shops and other occasions. In addition to solar film and thermal insulation film, it can also be used to measure various kinds of film coated glass, automobile side glass and PC materials. characteristic: 1. Unique key, easy to operate. When measuring, just put the tested material into the test slot to display the three test results 2. The LS163A thermal insulation film tester adopts a parallel light path design, with a test notch of 6mm. It can test thin materials such as solar film, and also can test large thickness materials, such as automobile side shield glass 3. The display interface can rotate 360 ° adaptively, which is convenient for reading data when testing from different angles 4. The LS163A solar film tester has the real-time dynamic self-calibration function. After startup, the transmittance is automatically calibrated to 100%, and the barrier rate is automatically calibrated to 0% 5. The instrument can choose to display only the transmittance, or to display both the barrier rate and the transmittance or the transmittance and the transmittance at the same time 6. The instrument has data locking function. During the test, press the HOLD key on the instrument to lock the test data. After the test sample is removed, the data is still locked on the display interface 7. LS163A portable solar film tester is compact and anti-skid design 8. Easy to grasp and carry Technical parameters: UV: peak wavelength 365nm Infrared: peak wavelength 1400nm Visible light: 380nm-760nm full band, in line with CIE standard for bright vision function Measurement accuracy: ± 2% (colorless and uniform transparent material), and the ex-factory standard sample is better than ± 1% Resolution: 0.1% Test slot size: 6mm wide × 58mm deep Overall dimension: 146mm long × Width 73mm × Height 24mm Instrument weight: about 187g (including battery) Display: 128 * 128 dot matrix LCD Power supply: 4 AAA alkaline dry batteries
Introduction: LS163A solar film tester is an instrument for measuring the optical properties of uniform transparent materials such as solar film, coated glass, thermal insulation glass, car side glass, etc. There are three display interfaces, which can display the transmittance separately, and also can display the barrier and transmittance at the same time. LS163A solar film tester is mainly applicable to various solar films, glass manufacturers, car 4S stores, car beauty shops and other occasions. In addition to solar film and thermal insulation film, it can also be used to measure various kinds of film coated glass, automobile side glass and PC materials.
