LS126C ultraviolet radiation meter Introduction: LS126C ultraviolet radiation meter is a professional instrument for measuring the intensity of UVC sterilization lamp. According to the detection requirement of 1 meter distance specified in the WST 367-2012 Technical Specification for Disinfection of Medical Institutions, the instrument is provided with a 1 meter test hook to ensure that it fully meets the detection standard. LS126C also has bluetooth data transmission function. After connecting with mobile phone APP, it can monitor the intensity of germicidal lamp in real time from a certain distance to prevent testers from being burnt by ultraviolet rays. LS126C ultraviolet irradiance meter has been widely used in 253.7nm UVC sterilization lamp intensity measurement in hospitals, CDC, pharmaceutical factories, food and drug administrations, environmental monitoring stations and other fields. characteristic: 1. The LS126C ultraviolet intensity detector, according to the detection requirement of 1 meter distance specified in the WST 367-2012 Technical Specification for Disinfection of Medical Institutions, presents a 1 meter test hook. The instrument can be placed on the hook base, and the hook can be hung on the lamp tube for measurement. 2. The instrument is equipped with bluetooth data transmission function, which can wirelessly monitor data from a certain distance after connecting to a dedicated mobile phone APP, to avoid the tester being burned by ultraviolet rays when viewing data on site. 3. The LS126C ultraviolet irradiance meter has the function of intelligent statistical data, and real-time statistics of power real-time value, maximum value, minimum value, average value, measurement duration, test date and time in the measured data. The real-time clock function of the instrument can be used to trace the test date and time of historical data. 4. The instrument can be set to shut down automatically within 1-10 minutes, and the test data will be automatically saved when it is shut down. When it is turned on again, the NO.1 data displayed on the screen is the latest test data, which can be measured unattended. The instrument can record up to 25 groups of data. Technical parameters: Spectral response: 230nm-280nm, λ p=254nm Range: 0 - 20000 μ W/cm ² Resolution: 0.1 μ W/cm ² Relative indication error: ± 8% (relative to NIM standard) Long-wave response error:<60% Cosine characteristic (directional response) error: 10% Linear error: ± 1% Short-term instability: ± 1% (30min after startup) Fatigue characteristics: attenuation<2% Zero value error: ± 0.1% of full scale Sampling speed: 6 times/second Diameter of test light hole: ￠ 10mm Power data storage interval: 1s/10s/60s optional Recording cycle: 10 minutes/100 minutes/600 minutes Bluetooth transmission distance: 50 meters (open area) Probe size: diameter 39mm × 15mm thick Host size: 148 long × Width 76 × Height 26 (mm) Probe wire length: 1m Instrument weight: about 293 g Display screen: 240 * 160 dot matrix LCD Power supply mode: 4 AAA alkaline dry batteries
Introduction: LS126C ultraviolet radiation meter is a professional instrument for measuring the intensity of UVC sterilization lamp. According to the detection requirement of 1 meter distance specified in the WST 367-2012 Technical Specification for Disinfection of Medical Institutions, the instrument is provided with a 1 meter test hook to ensure that it fully meets the detection standard. LS126C also has bluetooth data transmission function. After connecting with mobile phone APP, it can monitor the intensity of germicidal lamp in real time from a certain distance to prevent testers from being burnt by ultraviolet rays. LS126C ultraviolet irradiance meter has been widely used in 253.7nm UVC sterilization lamp intensity measurement in hospitals, CDC, pharmaceutical factories, food and drug administrations, environmental monitoring stations and other fields.
