LS110H split solar film tester Introduction: LS110H split type solar film tester is a split type test instrument with super magnetic force, which can be automatically sucked on the material to be tested. It can be directly used on the front or installed glass of the car. It can be measured at the same time. The infrared blocking value, ultraviolet blocking value and visible light transmittance value of the material were measured. Mainly used in the optical performance testing of automotive solar film. Infrared uses a 1400nm light source, which is especially suitable for solar film tests with good reflection properties such as metal film. The LS110H split solar film tester consists of two parts: the main unit (PARTI) and the sub unit (PARTII). The main function is measurement and display. The auxiliary function is to measure the light source and align the laser. Features: 1. The split-unit mode of the main and auxiliary machines can be directly used for testing on the front of the car or on the installed foil. 2. UV blocking rate meter, infrared blocking rate meter, visible light transmittance meter (light transmittance meter) three-in-one. 3. Built-in lithium rechargeable battery, no need to replace the battery, easy to use. 4. Built-in charger, computer USB port can be used to charge it. 5. The laser alignment function ensures accurate alignment of the main and auxiliary machines during the measurement process to ensure measurement accuracy. Technical Parameters: Dimensions: length 130mm × width 70mm × height 84mm Resolution: When the measured value is <10%, the resolution is 0.1%; the other range resolution is 1% Instrument weight: 630 grams Measurement accuracy: better than ± 2% (colorless uniform light-transmitting material) Test sample size: greater than 40mm × 40mm UV: Peak wavelength 365nm Visible light: peak wavelength 550nm Infrared: Peak wavelength 1400nm Power supply: built-in lithium rechargeable battery
Introduction: LS110H split type solar film tester is a split type test instrument with super magnetic force, which can be automatically sucked on the material to be tested. It can be directly used on the front or installed glass of the car. It can be measured at the same time. The infrared blocking value, ultraviolet blocking value and visible light transmittance value of the material were measured. Mainly used in the optical performance testing of automotive solar film. Infrared uses a 1400nm light source, which is especially suitable for solar film tests with good reflection properties such as metal film. The LS110H split solar film tester consists of two parts: the main unit (PARTI) and the sub unit (PARTII). The main function is measurement and display. The auxiliary function is to measure the light source and align the laser.
