LS110 split type transmittance meter Introduction: The LS110 split light meter is a light transmittance test instrument for detecting the front windshield of the car. The instrument consists of a host (PARTI) and a slave (PART II). The main function is measurement and display, and the auxiliary function is measurement. Light source and alignment laser. The LS110 glass transmittance tester consists of three independent test units with visible light and a display value of visible light transmittance (average of three measurements). The test principle of the instrument is to use the visible light source to illuminate the measured transparent substance. The sensor detects the incident light intensity of the light source and the light intensity after passing through the measured transparent substance. The ratio of the transmitted light intensity to the incident light intensity is the light transmittance. , expressed as a percentage. Features: 1. The main and auxiliary modes are convenient for on-site measurement, such as the measurement of the transmittance of the front glass of the car, and the transmittance test of the glass of the building. 2. It is measured by three visible light sources, and the display value is the average value of the three-way measurement. The measurement result has strong anti-interference ability. 3. Built-in lithium rechargeable battery, no need to replace the battery, as long as it can be charged, easy to use. 4. The laser alignment function ensures accurate alignment of the main and auxiliary machines during the measurement process to ensure measurement accuracy. 5. The test data has a hold function (HOLD) for easy photo taking. Technical Parameters: 1. Dimensions: length 130mm × width 70mm × height 84mm 2. Instrument weight: 630 grams 3. Resolution: 0.1% 4. Measurement accuracy: better than ± 2% (colorless uniform light-transmitting material) 5. Power supply: built-in lithium rechargeable battery 6. Test sample size: greater than 40mm × 40mm 7. Spectral range: 380nm-760nm full wavelength, in line with CIE Ming visual function standard
Introduction: The LS110 split light meter is a light transmittance test instrument for detecting the front windshield of the car. The instrument consists of a host (PARTI) and a slave (PART II). The main function is measurement and display, and the auxiliary function is measurement. Light source and alignment laser. The LS110 glass transmittance tester consists of three independent test units with visible light and a display value of visible light transmittance (average of three measurements). The test principle of the instrument is to use the visible light source to illuminate the measured transparent substance. The sensor detects the incident light intensity of the light source and the light intensity after passing through the measured transparent substance. The ratio of the transmitted light intensity to the incident light intensity is the light transmittance. , expressed as a percentage.
