LQ-80 Falling Ball Impact Tester Introduction: LQ-80 Falling Ball Impact Tester is mainly used for automotive interior and exterior components made of organic materials, such as plates, films, linings, column decorative panels, anti-scratch panels, etc., to determine the specimens produced by impact ball impact. Test of the energy required for the crack. This instrument is based on the Volkswagen Group standard, "PV3905 organic materials: ball drop test" "PV3966 PP components; stress whitening performance (falling ball test)", two standard test requirements customized a ball impact tester. Automotive structural materials such as sheet metal, thin foil, and shroud are subject to strict regulations and requirements. The factory inspection of automotive organic materials manufacturers requires continuous testing of products; automotive manufacturing companies purchase components. Entry sampling is also required, in which a falling ball impact test is performed at a low temperature. Features: 1. The steel ball is electromagnetically suspended and automatically released, effectively avoiding systematic errors caused by human factors. 2. Unique sample positioning groove design, pneumatic clamping and release of sample, faster and more accurate test operation 3. Transparent protection device, the test process is not only safe but also observable 4. Adsorption measurement rod and support rod double height scale design, more convenient to test height accuracy adjustment 5. The data is clear and wear-resistant. The adsorption measuring rod with multi-directional scale can be adjusted freely from 100mm to 800mm. 6. The clamping clamp is integrated on the protective pipe connection, and the cylinder adjustment is automatically raised and lowered to ensure the verticality of the protective pipe test. 7. Foot switch start mode, safe operation and humanized design Technical Parameters: Test height: 100mm-800mm (optional adjustment) Steel ball specifications: diameter (50.0 ± 0.03) mm; weight (500 ± 5g Sample clamping: pneumatic Groove specifications: depth (10 ± 0.5) mm; diameter (50.0 ± 0.5mm)
Introduction: LQ-80 Falling Ball Impact Tester is mainly used for automotive interior and exterior components made of organic materials, such as plates, films, linings, column decorative panels, anti-scratch panels, etc., to determine the specimens produced by impact ball impact. Test of the energy required for the crack. This instrument is based on the Volkswagen Group standard, "PV3905 organic materials: ball drop test" "PV3966 PP components; stress whitening performance (falling ball test)", two standard test requirements customized a ball impact tester. Automotive structural materials such as sheet metal, thin foil, and shroud are subject to strict regulations and requirements. The factory inspection of automotive organic materials manufacturers requires continuous testing of products; automotive manufacturing companies purchase components. Entry sampling is also required, in which a falling ball impact test is performed at a low temperature.
