Introduction: The FDI-01 Dart Impact Tester is suitable for the determination of the impact mass and energy of a plastic film or sheet at breakage of a given height of a free-falling dart. At the beginning of the test, first select the test method, an initial mass and △ m value, the test. If the first sample is damaged, use the weight △ m to reduce the mass of the body. If the first sample is not broken, the mass of the body must be increased with the weight △ m. In short, the use of weights to reduce or increase the body mass, depending on whether the previous sample is damaged. After 20 samples are tested, the total number of damage N is calculated. If N is equal to 10, the test is completed. If N is less than 10, the test is continued after adding the sample and N is equal to 10. If N is greater than 10, the sample is added and the test is continued until it is not damaged The total number is equal to 10, finally the system automatically calculates the impact results. Features: 1Windows visual menu-based interface, touch screen operation, user-friendly to quickly set the test parameters 2 provides A, B two test modes, and automatically determine the test status 3 dart using electromagnetic hanging principle, can be automatically released, effectively avoiding human error caused by systematic errors 4 sample pneumatic clamping, manual and pedal dual start mode, built-in observation lamp unique design, user-friendly fast and accurate test operation 5 professional computer software to support the test results A variety of unit display, test process graphics display, output and printing capabilities, clear and intuitive test results will be displayed to the user 6 micro-printer and a standard RS232 interface to facilitate the system's external connection to the computer and data transfer 7 Supports Lystem ™ Laboratory Data Sharing System for unified management of test results and test reports Specifications: Measurement methods: A method, B method optional Test range: A method: 50 ~ 2000g; B method: 300 ~ 2000g Test accuracy: 0.1 g (0.1J) Sample folder: Pneumatic Air pressure: 0.6 MPa (air source user-supplied) Air interface: Φ8 mm polyurethane tube Sample clamping:> 150 mm × 150 mm Power: 220VAC 50Hz / 120VAC 60Hz Net weight: 70 Kg Dimensions: A method: 500mm (L) × 450mm (W) × 1320mm (H) Method B: 500 mm (L) × 450 mm (W) × 2160 mm (H)
Introduction: The FDI-01 Dart Impact Tester is suitable for the determination of the impact mass and energy of a plastic film or sheet at breakage of a given height of a free-falling dart. At the beginning of the test, first select the test method, an initial mass and △ m value, the test. If the first sample is damaged, use the weight △ m to reduce the mass of the body. If the first sample is not broken, the mass of the body must be increased with the weight △ m. In short, the use of weights to reduce or increase the body mass, depending on whether the previous sample is damaged. After 20 samples are tested, the total number of damage N is calculated. If N is equal to 10, the test is completed. If N is less than 10, the test is continued after adding the sample and N is equal to 10. If N is greater than 10, the sample is added and the test is continued until it is not damaged The total number is equal to 10, finally the system automatically calculates the impact results.
