LDG-MIK electromagnetic flowmeter Introduction: The upgraded LDG-MIK electromagnetic flowmeter is a flow meter that is tested according to Faraday's electromagnetic induction law. The advantages of electromagnetic flow meters are minimal pressure loss and a wide range of measurable flow rates. The ratio of maximum flow rate to minimum flow rate is generally above 10:1. It is suitable for a wide range of industrial pipe diameters, with a maximum of 3m. The output signal is linear with the measured flow rate, with high accuracy. It can measure conductivity ≥ 5 μ The flow rate of acid, alkali salt solutions, water, sewage, corrosive liquids, as well as fluids such as mud, mineral pulp, and pulp in s/cm. Electromagnetic flow meters are widely used in the measurement and control of process flow in industrial and agricultural production companies, such as petrochemical, steel metallurgy, water supply and drainage, water irrigation, water treatment, sewage treatment stations (environmental pollution control, chemical wastewater, electroplating wastewater), papermaking (pulp), mud, pharmaceuticals, food, etc. Technical parameters: Product Name: Intelligent Direct Display Electromagnetic Flowmeter Accuracy level: ± 0.5% R (0.5 ‰) Nominal pressure: 1.6MP (DN10-DN250) 1.0MPA (DN300-DN1000) 0.6MPA (DN1200-DN2000) (Other specifications can be customized) Installation method: flange installation (default); Flange clamping (customized); Clamp installation (customized) Electrode type: 316L electrode (default) HB/HC alloy electrode Titanium electrode, tantalum electrode, tungsten carbide electrode, platinum electrode Lining material: chloroprene rubber (CR), polytetrafluoroethylene (F4) Polyurethane rubber (PU), perfluoroethylene (F46) Range ratio: 10:1 Working environment: Sensor: -25-150 ℃ Converter: 10-60 ℃ Fluid requirements: Conductive medium (conductivity ≥ 5US/CM liquid)
Introduction: The upgraded LDG-MIK electromagnetic flowmeter is a flow meter that is tested according to Faraday's electromagnetic induction law. The advantages of electromagnetic flow meters are minimal pressure loss and a wide range of measurable flow rates. The ratio of maximum flow rate to minimum flow rate is generally above 10:1. It is suitable for a wide range of industrial pipe diameters, with a maximum of 3m. The output signal is linear with the measured flow rate, with high accuracy. It can measure conductivity ≥ 5 μ The flow rate of acid, alkali salt solutions, water, sewage, corrosive liquids, as well as fluids such as mud, mineral pulp, and pulp in s/cm. Electromagnetic flow meters are widely used in the measurement and control of process flow in industrial and agricultural production companies, such as petrochemical, steel metallurgy, water supply and drainage, water irrigation, water treatment, sewage treatment stations (environmental pollution control, chemical wastewater, electroplating wastewater), papermaking (pulp), mud, pharmaceuticals, food, etc.
