LC3050N type semi-preparation system Introduction
The LC3050N gradient semi-preparative system was designed for the purification of laboratory-treated gradient elution conditions with a flow rate of 50 mL/min. The flow range is suitable for columns with an internal diameter of 20 to 30 mm, which can meet the purification requirements of a single purification milligram to gram sample for optimum purity and recovery. It is mainly used for the preparation of separation and purification samples requiring gradient elution conditions.
The LC3050N gradient semi-preparative system is also used for verification and optimization of preparation methods. The preparative chromatographic conditions obtained by analytical liquid chromatography were amplified to a semi-preparative chromatography system, and the preparative chromatographic conditions were verified to further optimize the recommended system.
Feature
Solvent transfer double plunger reciprocating pump, double plunger aspiration, small pulsation; electronic compensation, accurate flow rate
Slow start, stop, maximum/minimum pressure adjustable, automatic storage of user data
High pressure protection, automatically stops above the set pressure value
Dynamic mixing, solvent mixing is more complete, repeatability is better 1/16" pipe connection, convenient and practical
Signal detection range of 190-800nm wavelength, wider application range
GLP information function, easy to view the total lighting time, number of lighting, replacement lamp number and product serial number and other device information
Display 320X240 dot matrix large screen LCD display, simple and generous
Control mode independent control mode: through the LCD panel button control, set all working parameters, making the operation more flexible
Computer Control Mode 1: Connect via RS232 serial port, use CXTH workstation software control system
Computer Control Mode 2: Connect via a network cable and use the Clarity Workstation Software Control System
Mainly used to separate and purify target monomers from mixtures
Versatility for both positive and negative solvent systems
Optional versions and bio-compatible versions are available for self-selection
LC3050N type semi-preparation system Introduction
The LC3050N gradient semi-preparative system was designed for the purification of laboratory-treated gradient elution conditions with a flow rate of 50 mL/min. The flow range is suitable for columns with an internal diameter of 20 to 30 mm, which can meet the purification requirements of a single purification milligram to gram sample for optimum purity and recovery. It is mainly used for the preparation of separation and purification samples requiring gradient elution conditions.
The LC3050N gradient semi-preparative system is also used for verification and optimization of preparation methods. The preparative chromatographic conditions obtained by analytical liquid chromatography were amplified to a semi-preparative chromatography system, and the preparative chromatographic conditions were verified to further optimize the recommended system.
