Introduction:
Lab130 is a portable, all-digital gasoline octane number tester that can be quickly and easily, accurately, without damaging the octane number of the gasoline sample and the cetane number of the diesel, both for the laboratory , Can also be used for field testing. It is the first domestic can detect gasoline octane number, also applies to diesel cetane instrument. It uses the dielectric constant method to detect octane number and cetane number detection technology, in full compliance with international standards (ASTM D2699-86, ASTM D2700-86), commonly used in the analysis of power gasoline and diesel quality, with the research method RON, motor The method MON corresponds to the cetane number CN. Features:
1 Measure gasoline octane number and diesel cetane number
2 with the most authoritative domestic gasoline octane number and diesel cetane number database
3 repeatable error range is 0.2 octane units
4 A variety of additives containing gasoline can be measured
5 also shows RON, MON and anti-blast index (AKI).
6 measurement of diesel cetane number CN, diesel type
7 powerful processing chip can be fast and accurate data processing
8 The instrument is equipped with six oil test data models to suit the various conditions of the oil measurement
9 easy to operate, small size, easy to carry, box anti-vibration, anti-solvent, sealed, the use of low cost
10 through the RS232 data transmission line can be connected to the computer, the computer can be directly operated and printed
11 Traditional octane number test machine and cetane number testing machine need professional and technical personnel operation, the process is cumbersome, and need to consume a large number of reference fuel, equipment maintenance costs are expensive, so that ordinary users to determine the octane number of cetane There is a lot of difficulty. The rapid measurement of fuel for Lab130 is more efficient than traditional methods. Technical Parameters:
Measurement items: all kinds of gasoline, diesel
Octane measurements are met: ASTM D2699-86, ASTM D2700-86.
Diesel cetane measurements are met: ASTM D4737-03, ASTM D613, EN ISO 5165.
Measuring range: octane number: 40-120 (accuracy ± 0.5), cetane number: 20-100 (accuracy ± 1)
Measurement time for each sample: <8 seconds
Instrument consumption current: 30mA,
Battery standby time: 100 hours
Operating range: temperature -10 ℃ ~ +40 ℃, relative humidity 30% ~ 81% R.H., atmospheric pressure 64 ~ 106kPa
Dimensions
Sensor: 60mm × 100mm,
Host: 236mmx130mmx43mm
Introduction:
Lab130 is a portable, all-digital gasoline octane number tester that can be quickly and easily, accurately, without damaging the octane number of the gasoline sample and the cetane number of the diesel, both for the laboratory , Can also be used for field testing. It is the first domestic can detect gasoline octane number, also applies to diesel cetane instrument. It uses the dielectric constant method to detect octane number and cetane number detection technology, in full compliance with international standards (ASTM D2699-86, ASTM D2700-86), commonly used in the analysis of power gasoline and diesel quality, with the research method RON, motor The method MON corresponds to the cetane number CN.