KY-0125 Liquefied petroleum gas hydrogen sulfide analyzer Introduction: This instrument is used to detect the presence or absence of hydrogen sulfide in liquefied petroleum gas. The lower limit of detection of hydrogen sulfide is 4mg/m3. If methyl mercaptan is present on lead acetate strip, it will produce a short yellow stain, but it will be less than 5min. Disappeared, other sulfides in liquefied petroleum gas did not interfere with the test. Features: 1. The test glass tube meets the standard requirements and has a glass hook inside; 2. Support 500ml stainless steel sampler; 3. The gas passes through the thermal evaporation bath, and the needle valve regulates the flow rate; 4, microcomputer temperature controller, PID adjustment, PT100 temperature sensor, high precision. Technical Parameters: 1. Applicable standards: ASTM D2420 SH/T0125 2, heating method: electric heating tube heating 3, temperature control mode: digital display PID temperature controller 4, flow control: needle valve adjustment, flow meter display flow 5, the whole machine power: 1000W 6, working power: AC220V 50HZ
Introduction: This instrument is used to detect the presence or absence of hydrogen sulfide in liquefied petroleum gas. The lower limit of detection of hydrogen sulfide is 4mg/m3. If methyl mercaptan is present on lead acetate strip, it will produce a short yellow stain, but it will be less than 5min. Disappeared, other sulfides in liquefied petroleum gas did not interfere with the test.