1 Sales KRH-2 type oil and synthetic liquid anti-emulsification performance tester,Manufacturer
Position: Home > > Industry specific instrument > Oil special analytical instrument > Anti emulsification instrument > KRH-2 type oil and synthetic liquid anti-emulsification performance tester

KRH-2 type oil and synthetic liquid anti-emulsification performance tester

Product ID:HZSYkrh010

Price: Please inquire PDF Format
Supply Ability:20SETS/MON
Port:SHENZHEN
share:
  • Product Introduction
  • Consulting
  • Model NumberKRH-2
    Brand NameZIBOKULUN
    Payment TermsT/T, paypal
    Introduction:
    The instrument complies with the standard of GB7305-87 "Determination of anti-emulsification performance of petroleum and synthetic liquid", that is, under the specified experimental conditions, the same volume of test oil and distilled water are stirred to form an emulsion, and the separation is determined (ie oil and moisture interface). The time required for the volume of the opacifying layer or less than 3 ml; at the same time, it satisfies GB/T7305-2003 "Water and Synthetic Liquid Water Separation Determination Method". The instrument uses high-precision digital thermostat, double-layer thermostatic bathtub, which has the advantages of uniform temperature distribution and high temperature control precision. It also adopts two digital time timers, which are easy to operate, timely and accurate, and are widely used in petroleum. , chemical, electric power and other systems.
    Technical Parameters:
    Sample hole: 3
    Temperature range: room temperature -100 ° C
    Temperature control accuracy: ±0.1 °C
    Timing range: 0~100min
    Stirring speed: 1500 1500±15r/min adjustable speed
    Power supply voltage: AC220V±10% 50Hz±10%
    Power: ≤1200W
    Water bath volume: 18L
    Dimensions: 400 × 400 × 720mm

     
     
  • Introduction:
    The instrument complies with the standard of GB7305-87 "Determination of anti-emulsification performance of petroleum and synthetic liquid", that is, under the specified experimental conditions, the same volume of test oil and distilled water are stirred to form an emulsion, and the separation is determined (ie oil and moisture interface). The time required for the volume of the opacifying layer or less than 3 ml; at the same time, it satisfies GB/T7305-2003 "Water and Synthetic Liquid Water Separation Determination Method". The instrument uses high-precision digital thermostat, double-layer thermostatic bathtub, which has the advantages of uniform temperature distribution and high temperature control precision. It also adopts two digital time timers, which are easy to operate, timely and accurate, and are widely used in petroleum. , chemical, electric power and other systems.
Products
Analytical instruments
Physical property test
Environmental monitoring and analysis
Lab general equipment
About us
About this website
Our service
Product purchase
Contact Us

Newsletter

Make Sure you dont miss interesting happenings by joining our newsletter program.

Contact Us
+86-18620722006
instruments@instrumentstrade.com