KLY-2 Gas Dew point analyzer Brief introduction:
QFS601 gas moisture analyzer is a non absolute method, using wet sensitive film device of moisture measuring instrument, with rapid response, wide measuring range, sensitive, simple and convenient operating characteristics.
In selecting high stability of wet sensitive device based on configuration precision perfect gas circuit system and circuit design, strict process, make the accurate and reliable, fast measurement of new dew-point meter, to avoid the such moisture sensor easily drift weaknesses, has the very good long-term stability and resistance to dust particles, not affected by oil and gas and most chemical gas influence, widely applicable to build gas, electric power, petroleum chemical industry, electronic industry, heat treatment etc a variety of gas water content rapid detection. The instrument that can be used as laboratory equipment for continuous measurement, also can be used in the production process for continuous monitoring.
The instrument in addition to dew point value outside, still have a volume ratio and so on many kinds of display mode, the measurement data can be saved. Instrument built-in high capacity rechargeable battery, ac/dc, especially suitable for no ac power source area to the field detection. main technical indicators
1. The range of measurement: dew point - 80 °C ~ + and (about 0.5 ~ 23632 μ L/L)
2. Absolute error: when the factory or less ± 3 °C;
3. Response time: by 63% (90%) meter, in the dew point - 40°C below, rise < 30 "(sixty"),
Down < sixty "(400); The higher the humidity, the faster response
4. Output signal: 4 ~ 20ma, RS232 or USB port (must be specified by customer)
5. Power supply: ac 220 + 22 v, fifty to sixty hz; Dc: instrument built-in battery
6. Medium conditions: temperature < + sixty °C
Pressure < 2 mp
Flow of 200 ml/min (recommended)
7. Body product: width × × high deep = 260 mm x 170 mm x 300 mm
Brief introduction:
QFS601 gas moisture analyzer is a non absolute method, using wet sensitive film device of moisture measuring instrument, with rapid response, wide measuring range, sensitive, simple and convenient operating characteristics.
In selecting high stability of wet sensitive device based on configuration precision perfect gas circuit system and circuit design, strict process, make the accurate and reliable, fast measurement of new dew-point meter, to avoid the such moisture sensor easily drift weaknesses, has the very good long-term stability and resistance to dust particles, not affected by oil and gas and most chemical gas influence, widely applicable to build gas, electric power, petroleum chemical industry, electronic industry, heat treatment etc a variety of gas water content rapid detection. The instrument that can be used as laboratory equipment for continuous measurement, also can be used in the production process for continuous monitoring.
The instrument in addition to dew point value outside, still have a volume ratio and so on many kinds of display mode, the measurement data can be saved. Instrument built-in high capacity rechargeable battery, ac/dc, especially suitable for no ac power source area to the field detection.