Introduction: 500 Vicat heat distortion testing machine Features: With the sample rack lift function, at the beginning of the trial or at the end of the sample rack to enhance or drop, 500 degree heat distortion Vicat test machine is mainly used for non-metallic materials such as resin Determination of the thermal deformation temperature and Vicat softening temperature of raw materials, plastic film, plastic pipe, plastic building materials, plastic containers, plastic housings, plastic toys, wire and cable sheath insulation, plastic profile and so on. Features: 1, innovative heating method: the exclusive use of air heating medium; 2, plastic Vicat heat distortion tester environmental safety: no oil pollution, odorless after volatile silicone oil, oil-free potential security risks; 3, a large range: the exclusive domestic can reach 500 degrees temperature test range Vicat test machine, the exclusive can reach 500 degrees temperature test range of thermal deformation testing machine; 4, plastic thermal deformation Vicat tester high efficiency: forced air cooling system, cooling speed from 300 ℃ to room temperature only 10 minutes, can be the next test quickly, while other domestic models takes about two or three hours; 5, high precision: no stirring motor, no vibration interference, which can achieve reliable displacement measurement; Technical Parameters: Temperature control range: Ambient temperature -400 ℃ Heating rate: (120 ± 10) ℃ / h (12 ± 1) ℃ / 6min (50 ± 5) ℃ / h Plastic oil-free Vicat heat distortion tester temperature indication error: 0.1 ℃ Temperature control accuracy: ± 0.5 ℃ The maximum deformation of the error indication: ± 0.001mm Oil-free air heating Vicat heat distortion testing machine deformation measurement range: 0-5mm Sample rack number: 6 Load bar and tray quality: 100g Plastic Vicat heat distortion tester heat medium: air medium Cooling method: forced air cooling Heating power: 5kw Test speed: 50 ℃ / h or 120 ℃ / h; Maximum temperature: set according to the flash point of the medium. Heat transfer medium: usually methyl silicone oil.
Introduction: 500 Vicat heat distortion testing machine Features: With the sample rack lift function, at the beginning of the trial or at the end of the sample rack to enhance or drop, 500 degree heat distortion Vicat test machine is mainly used for non-metallic materials such as resin Determination of the thermal deformation temperature and Vicat softening temperature of raw materials, plastic film, plastic pipe, plastic building materials, plastic containers, plastic housings, plastic toys, wire and cable sheath insulation, plastic profile and so on.
