KE-B1001 Wall Mounted Dew Point Meter Introduction: The KE-B1001 dew point analyzer can measure the trace moisture content in various gases, and is suitable for various on-line analysis occasions with strict control requirements for moisture content. It is an economical and general solution and can meet the control requirements of various industrial processes. Instrument measuring range: Measured gas pressure: positive pressure, micro pressure or negative pressure Main components, impurities, acid gases or sulfides of the measured gas Application: online measurement of gas moisture in petrochemical, natural gas, industrial gas, semiconductor, drying industry, food industry, electric power, machinery manufacturing, air separation, pharmaceutical and other industries. Features: 1. The imported capacitive dew point sensor has the characteristics of rapid response, high sensitivity and good repeatability; 2. Automatic data storage function, the recording interval can be freely set within the range of 1min~24h, and the alarm point can be set arbitrarily; 3. It can realize one-way or two-way communication with the computer; 4. Has a very long calibration period, typically two years; 5. Wall-mounted installation, convenient on-site use and simple maintenance; 6. A gas backflushing device can be added (optional) to avoid the pollution of the filter for a long time and affect the oxygen concentration measurement; 7. Built-in imported air pump (optional). Technical parameter Measuring principle: film capacitor Display mode: 128×64 dot matrix LCD Measuring range: Standard type: -80-+20℃ Extended type: -100-+20℃ Allowable error: ≤±2℃ Resolution: 0.1℃ Repeatability: ≤±1.5℃ Analog output: 4-20mA.DC (non-isolated output, load resistance less than 500 ohms) 0-5V.DC (non-isolated output, load resistance greater than 10k ohms) 1 channel programmable dry contact type passive alarm output, contact. Large capacity 220VAC/2A Other outputs: RS232 (default) or RS485 Power supply: AC170-265V 50/60Hz Working temperature: -10-+50℃ Sampling method: pass-in or decimation Sample gas flow: 1-3L/min Sample gas pressure (without pump): 0.05MPa≤Inlet gauge pressure≤0.35MPa Sample gas pressure (with pump): slight positive pressure, slight negative pressure or normal pressure Background gas: mixed gas such as H2, He, inert gas, hydrocarbon, etc. Size: 300mm×400mm×200mm (W×H×D) Service life: > 12 months (under normal use conditions) Pneumatic interface: NPT 1/8 female thread Installation method: wall-mounted
Introduction: The KE-B1001 dew point analyzer can measure the trace moisture content in various gases, and is suitable for various on-line analysis occasions with strict control requirements for moisture content. It is an economical and general solution and can meet the control requirements of various industrial processes. Instrument measuring range: Measured gas pressure: positive pressure, micro pressure or negative pressure Main components, impurities, acid gases or sulfides of the measured gas Application: online measurement of gas moisture in petrochemical, natural gas, industrial gas, semiconductor, drying industry, food industry, electric power, machinery manufacturing, air separation, pharmaceutical and other industries.
