Introduction: Products are widely used in plastic chemical companies and research institutions. The system is controlled by a single microcomputer, the product performance is more stable, easy to operate, high degree of automation, is currently the most advanced detection instruments for non-metallic materials deformation and softening temperature. KDY / UY-5006A thermal deformation, Vicat softening point temperature detector, is to adapt to the rapid development of the plastics industry and improve the level of research and testing of materials, using the latest international and national standards: ISO75-1: 1993 "plastic - Determination of load deflection temperature ", ISO 306: 1994" Plastics - Thermoplastics Vicat softening temperature measurement ", GB / T 1633-2000" Thermoplastics Vicat softening point temperature ", GB / T1634-2001" Determination of deformation temperature "design, widely used in plastics and chemical companies and research institutions. The system is controlled by a single microcomputer, the product performance is more stable, easy to operate, high degree of automation, is currently the most advanced detection instruments for non-metallic materials deformation and softening temperature. Specifications and performance: Temperature range: room temperature -300 ℃ Heating rate: 120 ± 10 ℃ / h (12 ℃ ± 1 ℃ / 6min) 50 ± 5 ℃ / h (5 ℃ ± 0.5 ℃ / 6min) Temperature error: ± 1 ℃ Deformation error: ± 0.01mm Temperature minimum resolution: 0.1 ℃ deformation minimum resolution of 0.01mm Load range: 0.864N-49.03N Load error: ± 2.5% Span test stand: 80-160mm continuously adjustable (suitable for thermal deformation test) Heating power: 4KW Power supply voltage: AC220V / 50Hz 20A Heating medium: methyl silicone oil or transformer oil (medium flash point temperature should be higher than the maximum test temperature). Cooling: 150 ℃ above air-cooled, 150 ℃ water cooling or natural cooling.
Introduction: Products are widely used in plastic chemical companies and research institutions. The system is controlled by a single microcomputer, the product performance is more stable, easy to operate, high degree of automation, is currently the most advanced detection instruments for non-metallic materials deformation and softening temperature. KDY / UY-5006A thermal deformation, Vicat softening point temperature detector, is to adapt to the rapid development of the plastics industry and improve the level of research and testing of materials, using the latest international and national standards: ISO75-1: 1993 "plastic - Determination of load deflection temperature ", ISO 306: 1994" Plastics - Thermoplastics Vicat softening temperature measurement ", GB / T 1633-2000" Thermoplastics Vicat softening point temperature ", GB / T1634-2001" Determination of deformation temperature "design, widely used in plastics and chemical companies and research institutions. The system is controlled by a single microcomputer, the product performance is more stable, easy to operate, high degree of automation, is currently the most advanced detection instruments for non-metallic materials deformation and softening temperature.
