JK-24DS soil drying oven Introduction: The JK-24DS soil drying oven adopts a dual mode of heating and hot air in the drying oven module, which simulates the indoor air flow mode, namely the air drying mode, for soil drying. Dry air is clean hot air that has undergone coarse filtration and activated carbon adsorption. The samples are stored and dried independently in separate rooms, which is clean and avoids cross contamination of the samples; Time saving; Effort saving; Save space; Improve soil drying efficiency and other characteristics. Applicable to the following standards regarding sample air drying requirements: GB/T 32722-2016 "Guidelines for Long term and Short term Storage of Soil Quality Soil Samples", HJ/T 166-2004 "Technical Specification for Soil Environmental Monitoring", NY/T 1121.1-2006 "Soil Testing Part 1: Collection, Treatment and Storage of Soil Samples", HJ/T 20-1998 "Technical Specification for Sampling and Preparation of Industrial Solid Waste" characteristic: 1. Using air disturbance technology and dual air sources to simulate indoor air flow, it maximizes the proximity to the indoor environment and achieves rapid air drying. 2. Advanced air filtration and adsorption technologies have been sampled, and a total exhaust guide port (which can be connected to an external exhaust pipe) is installed to prevent secondary cross contamination of the samples. 3. The heating block material of the drying oven is imported infrared ceramic heating, which heats uniformly and has a long service life. 4. The sample box is an independent sample chamber that separates the samples to prevent cross contamination. 5. The sample chamber is made of stainless steel material to avoid chemical corrosion and organic matter adsorption; Easy to clean. 6. The sample room is equipped with a transparent observation room, making it convenient for customers to observe the status of the samples at any time. 7. The sample room can be equipped with enamel trays, stainless steel trays, etc., which can directly place ordinary soil samples or high moisture samples such as riverbed mud. 8. Each sample chamber is equipped with an independent heating module, which significantly improves the constant temperature range and accuracy of each sample chamber, effectively enhances the uniformity of temperature control, and ensures no interference between adjacent sample chambers. 9.7-inch large LCD touch screen, convenient and easy to operate. 10. The air source chamber is placed inside a drying oven, which has undergone sound insulation treatment for the entire machine. It has the advantages of low noise, small footprint, simple operation, and easy maintenance. 11. Each sample box can be independently temperature controlled. 12. Equipped with a high-power ultra quiet air purification pump that can accelerate air circulation. 13. The sample room has a large space and can hold five kilograms of samples for easy drying. 14. The exhaust gas can be collected uniformly and discharged outdoors through pipelines. It can be discharged without pollution through activated carbon. 15. The bottom of the soil drying oven is equipped with rollers for easy movement. Technical parameters: Power supply voltage: 220V, 50Hz; Power: 1600W Dry air temperature range: room temperature -65 ℃ * 24, temperature control accuracy ± 1 ℃ (digital adjustable) Working environment: Temperature range of 20-40 ℃; Relative humidity of 10% to 80%; Drying room temperature of 40 ℃ with air purification device Sample room size (mm): 360 * 260 * 180 (length x width x height) Instrument size (mm): 1380 * 500 * 1680 (length x width x height) Control mode: 24 independent sample chambers are individually controlled by 24 sets of temperature sensors. Display mode: 7-inch color touch screen, real-time display of working
Introduction: The JK-24DS soil drying oven adopts a dual mode of heating and hot air in the drying oven module, which simulates the indoor air flow mode, namely the air drying mode, for soil drying. Dry air is clean hot air that has undergone coarse filtration and activated carbon adsorption. The samples are stored and dried independently in separate rooms, which is clean and avoids cross contamination of the samples; Time saving; Effort saving; Save space; Improve soil drying efficiency and other characteristics. Applicable to the following standards regarding sample air drying requirements: GB/T 32722-2016 "Guidelines for Long term and Short term Storage of Soil Quality Soil Samples", HJ/T 166-2004 "Technical Specification for Soil Environmental Monitoring", NY/T 1121.1-2006 "Soil Testing Part 1: Collection, Treatment and Storage of Soil Samples", HJ/T 20-1998 "Technical Specification for Sampling and Preparation of Industrial Solid Waste"
