Introduction: X-ray crystal analyzer is used to study the internal microstructure of matter, such as: single crystal orientation, defect detection, material qualitative determination of lattice parameters, determination of residual stress, etc. Technical Parameters: X-ray generator ● tube voltage: 10-60KV automatically controlled by the microcontroller (lkv / step) ● tube current: 5-80m A controlled by the microcontroller (lm A / step) ● tube voltage, tube current stability ≤ 0.03%; ● PLC module control, set parameters, shut down regularly ● Rated output power: 3KW ● No pressure, no flow, over-voltage, over-current, over power, water, X-ray tube over temperature protection. Cool the circulation system Comes with refrigeration system, no external circulating water, and automatic temperature control Water temperature shows water pressure, water flow protection. Stainless steel pumps, the noise is 20 db, and to avoid the generation of rust, do not make X-ray tube blocked X-ray shield X-ray shield 1.The use of high-density, high transmittance of lead glass as X-ray protection device, the amount of external radiation leakage is not greater than 2.5μ sv / h 2.X-ray tube target: Cu, Fe, Co, Cr, W and Mo are optional 3.Rated power: 2KW 4.Focus size (mm): point focus (0.1 x0.1), line focus (0.1 x0.1) 5.Rated voltage: 60KV 6.Rated current: 80mA 7.Debye camera can be configured, Laue camera or other models of imported cameras.
Introduction: X-ray crystal analyzer is used to study the internal microstructure of matter, such as: single crystal orientation, defect detection, material qualitative determination of lattice parameters, determination of residual stress, etc.