JDK300 grouting electromagnetic flowmeter Introduction: An electromagnetic flowmeter consists of two parts: a sensor and a converter. It works based on Faraday's law of electromagnetic induction and is an inductive instrument for measuring the volumetric flow rate of conductive media. In addition to measuring the volumetric flow rate of general conductive liquids, it can also be used to measure the volumetric flow rate of strongly corrosive liquids such as strong acids and alkalis, as well as homogeneous liquid-solid two-phase suspensions such as mud and slurry characteristic: 1. Adopting low-frequency rectangular binary wave excitation, with strong anti-interference performance. 2. The structure is simple, solid, and highly stable. 3. Applied to corrosive liquids such as acid and alkali: two-phase liquids such as cement slurry, ore slurry, mud, pulp, etc.: water supply and drainage systems. 4. Optional intelligent data display, realizing instantaneous display, recording, accumulation, adjustment, etc. of traffic. 5. The converter has strong interchangeability, and there is no need to re calibrate the actual flow when changing the flow rate. The method is simple. Technical parameters: Caliber range: DN25-DN50 Accuracy level: 0.5%. Range: 0-300L/min Working temperature: -25 ℃ to+60 ℃ Protection level: IP65 (waterproof type) Work pressure: 1.0-6.0 Mpa Output signal: 4-20 mA Working voltage: 220V Weight: 7.2Kg
Introduction: An electromagnetic flowmeter consists of two parts: a sensor and a converter. It works based on Faraday's law of electromagnetic induction and is an inductive instrument for measuring the volumetric flow rate of conductive media. In addition to measuring the volumetric flow rate of general conductive liquids, it can also be used to measure the volumetric flow rate of strongly corrosive liquids such as strong acids and alkalis, as well as homogeneous liquid-solid two-phase suspensions such as mud and slurry
