Summary: This instrument is a primary instrument for precipitation measurement, and its performance conforms to the national standard GB/T 11832-2002 "tipping bucket rain gauge" requirements. The core component of this instrument, the skip, adopts the three-dimensional streamline design, which makes the skip more smooth and easy to clean. This instrument is a precision double-tilting bucket rain gauge, which should be regularly maintained and cleaned during the use of tilting bucket and water funnel outlet. The tilting Angle of the tilting bucket has been adjusted and locked in the optimal tilting Angle position when the instrument leaves the factory. When installing the instrument, only the tilting bucket and the base level need to be adjusted according to the requirements of this manual can be put into use, and the tilting Angle adjustment screw cannot be adjusted on the spot. Main technical parameters: 1.Size of bearing nozzle: φ 20000.60 mm; acute angle of edge: 40 °~ 45 ° 2.Resolution: 0.2mm 3.Rain-intensity range: 0.01mm ~ 4mm/min (maximum rain-intensity of 8mm/min is allowed) 4. Measurement accuracy: less than or equal to 3% 5. Signaling mode: two ways of dry spring pipe on and off signal output 6. Work environment: Environment temperature: - 10 ℃ to 50 ℃ Relative humidity;< 95% (40 ℃) 7. Size: φ 216mm × 460mm
Summary: This instrument is a primary instrument for precipitation measurement, and its performance conforms to the national standard GB/T 11832-2002 "tipping bucket rain gauge" requirements. The core component of this instrument, the skip, adopts the three-dimensional streamline design, which makes the skip more smooth and easy to clean. This instrument is a precision double-tilting bucket rain gauge, which should be regularly maintained and cleaned during the use of tilting bucket and water funnel outlet. The tilting Angle of the tilting bucket has been adjusted and locked in the optimal tilting Angle position when the instrument leaves the factory. When installing the instrument, only the tilting bucket and the base level need to be adjusted according to the requirements of this manual can be put into use, and the tilting Angle adjustment screw cannot be adjusted on the spot.
