Introduction:
JCY-80E automatic soot (gas) sampler uses pitot tube constant sampling weight method to collect the particulate matter in the flue, locate the electrolytic method to determine the harmful gas in the flue gas, and determine the moisture content in the flue by the wet and dry bulb method. Can be widely used in environmental monitoring, labor protection, industrial hygiene, factories and mines and other departments for pipeline sampling of particulate matter and harmful gas concentration sampling, but also can be applied to the accuracy of flue gas continuous measurement instrument assessment and calibration. Technical Parameters:
Sampling flow: (5 ~ 80) L / min can be expanded
Smoke dynamic pressure: (0 ~ 2000) Pa
Flue gas static pressure and total pressure: (-30 ~ +30) kPa
Flowmeter before the pressure: (-40 ~ 0) kPa
Flowmeter before the temperature: (-30 ~ 150) ℃
Flue gas temperature: (0 ~ 500) ℃ can be expanded
Dry, wet bulb temperature: (0 ~ 100) ℃
Moisture content: (0 ~ 60)%
Atmospheric pressure: (70 ~ 130) kPa
Isokinetic suction flow rate: (1 ~ 45) m / s
The largest sampling volume: 999999.9L
Air excess coefficient: 0 ~ 99.99
Pre-temperature: (-30 ~ 99) ℃
Storage capacity: one million groups
Constant speed tracking response time: ≤ 4 seconds
Sampling pump load capacity: resistance is -20kPa, flow ≥ 50L / min
Flue gas sampling flow rate: 0.1L / min ~ 2L / min, factory setting 1.5L / min Features:
1, It can measure the parameters of dust, moisture content, flow rate, dynamic pressure, static pressure, smoke temperature, fume and smoke (such as O2, SO2, NO, NO2, CO, CO2, H2S)
2, AC and DC, optional high-capacity DC power box, can work in the absence of AC power supply, working time is greater than 8 hours.
3, equipped with intelligent flue gas pre-processor, the flue gas in the flue dust filter heating dehydration and other treatment, the measurement data more accurately.
4, automatic storage of monitoring data for query, print, data storage capacity of one million groups, the use of micro-printer can be connected to the RS232 interface on-site selective print sample reports, with USB memory or memory card to store data directly to generate Excel forms direct printing, professional Computer software can be connected to the computer for data communication print sample reports.
5, automatically remember the last input monitoring parameters, the next boot priority use, to achieve a key sample.
6, unique drying, filtration, anti-down suction three-in-one design of the drying cylinder, you can efficiently dry the moisture, filter dust and down suction to reduce the impact on the flow, to achieve long-term operation-free cleaning.
7, wide temperature LCD display, adjustable backlight and brightness, Chinese man-machine dialogue menu display, illustrated, simple and clear, users rely on the instrument rich online operation prompts, direct operation, and LCD screen can be freely rotated around 0-180 degrees, About 0 ~ 360 degrees around the free rotation, easy for the operator to view the data.
8, multi-level optical isolation, multi-CPU fault-tolerant structure to overcome electrostatic interference and electrostatic breakdown.
9, soot sampling and flue gas sampling are with pre-efficient gas-water separator, can be disassembled, effectively filtering the impact of water vapor on the pipeline and measurement results.
10, Automatic correction of temperature and pressure and other parameters, the standard data can be read directly, and power-off protection, after the call automatically enter the power-off state before sampling.
11, Through the waterproof keyboard, the parameters of the instrument can be calibrated linearly. The password must be input to maintain and calibrate the instrument to ensure the safety of all parameters of the instrument.
12, Pre-temperature sensor installed front bird cage, pre-measurement temperature is more accurate. Instrument leak self-test function.
13, real-time display direct reading dynamic pressure, static pressure, temperature, smoke temperature, flow rate, flow, speed, moisture content and other parameters, automatic measurement of atmospheric pressure.
14, the use of imported pressure sensors and imported electrochemical sensors for measurement, the result is more accurate. Electrochemical sensors and signal modules integrated design, replace the sensor without calibration, temperature and linear compensation and cross-interference correction to ensure test accuracy.
15, the use of corrosion-resistant large flow rate adjustable smoke sampling pump and electronic flowmeter, fast response, high tracking efficiency. Flue gas pipeline using four non-adsorption, the use of electronic flow meter constant current sampling, to ensure the accuracy of measurement results.
16, the instrument built-in rechargeable battery for AC power failure to save data exchange Call automatically resumed sampling, automatically deduct the power-down time in the sampling process, and for users to query the power-down time.
17, real-time sampling data display, and a schematic diagram of the user-friendly real-time observation instrument work.
18, can store the system settings of the various parameters, user-friendly, you can directly call the system settings or sampling settings, and have the system recovery and batch files, selective deletion.
19, the main machine, dust sampling tube, moisture content of the sampling tubes are used mold production, side tube design to avoid the tube on the takeover caused by blockage.
Introduction:
JCY-80E automatic soot (gas) sampler uses pitot tube constant sampling weight method to collect the particulate matter in the flue, locate the electrolytic method to determine the harmful gas in the flue gas, and determine the moisture content in the flue by the wet and dry bulb method. Can be widely used in environmental monitoring, labor protection, industrial hygiene, factories and mines and other departments for pipeline sampling of particulate matter and harmful gas concentration sampling, but also can be applied to the accuracy of flue gas continuous measurement instrument assessment and calibration.
