Introduction: HXS-3A three-element analyzer (microcomputer high-speed analyzer) The three-element analyzer adopts advanced technologies such as "intelligent dynamic follow" and "standard curve nonlinear regression", computer control and data processing, curve correction, automatic Display and print the test results, a total of 12 working curves can be stored, and 12 kinds of elements can be detected theoretically. It can fully satisfy the multi-element analysis of ordinary carbon steel, high, medium and low alloy steel, stainless steel, pig iron, ductile iron, alloy cast iron, ferromanganese and other materials. Features: 1. The technology of "intelligent dynamic follow" and "non-linear regression of standard curve" is adopted, and the result is digitally displayed and read directly. Automatic printing. 2. Using microcomputer control and data processing, 12 curves can be stored, and curve correction can be performed, with functions such as power failure data protection. 3. Reasonable instrument design, changing color filters, cuvettes, sample size, and rational use of curves can expand the variety and content range of measurement elements. technical parameter: 1. Analysis method: photoelectric colorimetric analysis method 2. Measuring range: 0-1.999A absorbance value, 0-99.99% concentration value (Take silicon, manganese, phosphorus, nickel, chromium, molybdenum, titanium, rare earth, and magnesium in ferrous metals as examples) Mn: 0.010～18.00% P: 0.0005～2.000% Si: 0.010～6.000% ΣRE: 0.010～0.500% Mg: 0.010～0.200% Cr: 0.01～28.000% Ni: 0.010～30.000% Mo: 0.010～7.000% Ti: 0.010～5.000% 3. Measurement accuracy: in line with GB/T223 standard 4. Measurable elements: silicon, manganese, phosphorus, copper, nickel, chromium, molybdenum, titanium, rare earth, magnesium, vanadium, aluminum, tungsten, niobium, etc.
Introduction: HXS-3A three-element analyzer (microcomputer high-speed analyzer) The three-element analyzer adopts advanced technologies such as "intelligent dynamic follow" and "standard curve nonlinear regression", computer control and data processing, curve correction, automatic Display and print the test results, a total of 12 working curves can be stored, and 12 kinds of elements can be detected theoretically. It can fully satisfy the multi-element analysis of ordinary carbon steel, high, medium and low alloy steel, stainless steel, pig iron, ductile iron, alloy cast iron, ferromanganese and other materials.
