HX-1 Arc Infrared Metal Material Element Analysis System
Introduction: The HX-1 metal material element analysis system is a new type of practical element analyzer in China. The instrument can satisfy the determination of elements in materials such as carbon steel, alloy steel, stainless steel, heat-resistant steel, malleable steel, and wear-resistant steel. Burn the sample in an electric arc furnace, determine the content of C and S elements by infrared analysis, and determine Mn, P, Si, Cr, Ni, Mo, Cu, Ti, V, Al, W, Nb, Mg, and Mg by photoelectric colorimetry. The content of the total rare earth and other elements. The analysis system consists of two parts: HX-HW8E arc infrared carbon and sulfur analyzer and HXS-3AD (4AD) computer multi-element analyzer. Its performance, quality and precision reach the domestic level. Features: 1. During the analysis process, the system dynamically displays various data and release curves of carbon and sulfur during the analysis process. The new single-chip technology is used to realize program control and data processing, which can quickly and accurately measure the content of other multi-elements in steel with a high degree of automation. 2. The carbon and sulfur element analysis adopts infrared method, which significantly improves the accuracy of carbon and sulfur element analysis. Especially the detection of ultra-low carbon below 0.02%. 3. The instrument uses advanced PCI data acquisition card, 14-bit A/D conversion chip, with fast communication between computer and peripherals, high A/D conversion sensor signal sampling rate, fast response speed, strong anti-interference ability, and stability High sexual characteristics. 4. There are 16 channels for carbon and sulfur element analysis, a total of 32 channels, and users can choose arbitrarily according to the level of material content; 5. The system has established a powerful database, which is convenient for customers to store, query, delete, edit and print the analysis result data and working curve. The modification of the data and the addition and deletion of the curve are very convenient. 6. Equipped with an electronic balance, which realizes the non-quantitative weighing of samples during the analysis process and improves the analysis speed of the system. 7. Non-contact high-frequency and high-voltage spark arc ignition, simple structure and easy maintenance. Material saving, energy saving, low use cost, low price and good quality, high cost performance. technical parameter: 1. Analysis method: carbon and sulfur adopt infrared analysis method; other multi-element adopt photoelectric colorimetry method. 2. Measuring range: (The instrument can detect many elements, including carbon, sulfur, silicon, manganese, phosphorus, nickel, chromium, molybdenum, titanium, copper, rare earth, and magnesium in ferrous metals) C: 0.005-10.0000% S: 0.0005-0.3500% Si: 0.010～6.000% Mn: 0.010～18.000% P: 0.0005～2.000% Ni: 0.010～30.00% Cr: 0.010～28.000% Mo: 0.010～7.000% Ti: 0.010～5.000% Cu: 0.010～8.000% ΣRE: 0.010～0.500% Mg: 0.010～0.200% 3. Analysis error: Carbon is better than GB/T223.69-2008 standard Sulfur is better than GB/T223.68-97 standard Other elements are better than GB223-88 standard 4. Electronic balance: weighing range 0-100g, reading accuracy 0.0001g 5. Computer: 19-inch liquid display of mainstream brand models 6. Measurement time: about 35 seconds for carbon and sulfur (excluding sampling and weighing time) and other elements are determined according to the situation
Introduction: The HX-1 metal material element analysis system is a new type of practical element analyzer in China. The instrument can satisfy the determination of elements in materials such as carbon steel, alloy steel, stainless steel, heat-resistant steel, malleable steel, and wear-resistant steel. Burn the sample in an electric arc furnace, determine the content of C and S elements by infrared analysis, and determine Mn, P, Si, Cr, Ni, Mo, Cu, Ti, V, Al, W, Nb, Mg, and Mg by photoelectric colorimetry. The content of the total rare earth and other elements. The analysis system consists of two parts: HX-HW8E arc infrared carbon and sulfur analyzer and HXS-3AD (4AD) computer multi-element analyzer. Its performance, quality and precision reach the domestic level.
