Introduction: Ozone aging test chamber | imported ozone aging test chamber on three sides of the air channel sandwich, distributed heating humidifier, circulating fan and other devices, the upper chamber of the test chamber with a balanced exhaust hole, the need to continue to discharge the gas in the laboratory, The balance of gas concentration in the test chamber is maintained. The test chamber is a single-opening door and is sealed with ozone-resistant silicone rubber. Ozone aging test chamber is suitable for testing ozone aging resistance and aging cracking test of non-metal materials and organic materials (such as paints, paints, rubbers, plastics, and their products) of rubber products. Technical Parameters: 1. Ozone concentration: 0-500pphm, 0-1000pphm, 100-250ppm (optional) 2. Ozone concentration accuracy: ±10% 3. Laboratory temperature: RT +10 ~ 80 °C, -10 ~ 80 °C (optional) 4 temperature uniformity: ± 2 °C 5. Relative humidity: 60 to 95% RH 6. Sample rack rotation speed: 2R/min (optional) 7. Sample rack pull frequency: 0.5Hz (optional) 8. Air speed: 12 ~ 16mm/s 9. Test gas flow: 20 to 70 L/min 10. Use the power: 220V ± 10%
Introduction: Ozone aging test chamber | imported ozone aging test chamber on three sides of the air channel sandwich, distributed heating humidifier, circulating fan and other devices, the upper chamber of the test chamber with a balanced exhaust hole, the need to continue to discharge the gas in the laboratory, The balance of gas concentration in the test chamber is maintained. The test chamber is a single-opening door and is sealed with ozone-resistant silicone rubber. Ozone aging test chamber is suitable for testing ozone aging resistance and aging cracking test of non-metal materials and organic materials (such as paints, paints, rubbers, plastics, and their products) of rubber products.
