HSY-1633A Vicat softening point tester Introduction
HSY-1633A Vicat softening point tester is designed to adapt to the rapid development of the plastics industry and improve the research and testing level of materials, using the latest international standards and national standards. It adopts single-chip technology to make the product performance stable, easy to operate and high in automation. For the determination of heat distortion temperature (HDT) and Vicat softening point temperature (VICAT) of non-metallic materials. This series of instruments are in line with international standards and national standards: ISO75-1: "Determination of plastic-load deformation temperature", ISO 306: "Determination of plastic-thermoplastic Vicat softening point temperature", GB/T1633-2000 "The thermoplastic dimension Determination of card softening point temperature, GB/T1634-2004 "Determination of plastic-load deformation temperature".
Technical Parameters
1, temperature control and measurement range: room temperature -300 ° C
2, heating rate: thermal deformation 120 ° C / h (12 ± 1 ° C / 6 min)
Vicat 50 ° C / h (5 ± 0.5 ° C / 6 min)
3, the maximum temperature error: 1 ° C
4, deformation measurement mode: sensor automatic measurement
5, the maximum deformation error: 0.01mm
6, temperature resolution: 0.1 ° C
7, deformation resolution: 0.001mm
8. Test frame span: 60-120mm continuously adjustable (suitable for thermal deformation test)
9, the number of sample racks: 3
10, heating medium: methyl silicone oil (test temperature is lower than 200 ° C optional transformer oil)
11, heating power: 4KW
12, display print function: can print test results
13, mixing method: oblique double stirring
14, power: 220V ± 10% 20A 50HZ
15, host shape: A type desktop B type floor type
16, other functions:
a. With the upper limit temperature setting, the heating is automatically turned off when the temperature reaches the upper limit temperature value or 300 ° C or the end of the test.
b. It has an audible and visual alarm function. When the test is over, it is about to end, it is in the zero adjustment state and the reset state, an audible and visual alarm is issued.
Introduction
HSY-1633A Vicat softening point tester is designed to adapt to the rapid development of the plastics industry and improve the research and testing level of materials, using the latest international standards and national standards. It adopts single-chip technology to make the product performance stable, easy to operate and high in automation. For the determination of heat distortion temperature (HDT) and Vicat softening point temperature (VICAT) of non-metallic materials. This series of instruments are in line with international standards and national standards: ISO75-1: "Determination of plastic-load deformation temperature", ISO 306: "Determination of plastic-thermoplastic Vicat softening point temperature", GB/T1633-2000 "The thermoplastic dimension Determination of card softening point temperature, GB/T1634-2004 "Determination of plastic-load deformation temperature".
