HSY-0983 drug cone penetration tester Introduction: The HSY-0983 drug cone penetration tester is designed and manufactured according to the technical requirements and relevant regulations of the 2015 Pharmacopoeia "0983 Cone Measurement Method" of the People's Republic of China. It is mainly applicable to ointments, eye ointments and their commonly used matrix materials. (such as petrolatum, lanolin, beeswax) and other semi-solid substances, in order to control its soft hardness and viscosity and other properties, to avoid affecting the coating ductility of the drug. The degree of drug penetration refers to the use of free fall motion to release a cone of a certain mass downward from the cone meter at 25 ° C, and determine the depth of the test product within 5 seconds after the cone is released. Features: 1, using a digital display to display the cone penetration value, intuitive and eye-catching. 2. The cone-in time control device has a total of 6 files, and the control time is high. 3. It has the functions of coarse adjustment and fine adjustment of the lifting frame, convenient adjustment and accurate cone. 4, equipped with a constant temperature bath, water bath temperature automatic control, a multi-purpose machine, the instrument cost-effective. 5, standard I cone and cone, I sample cup (flat bottom cylinder). The biggest features of this instrument are: advanced mechanical design, convenient lifting adjustment; digital temperature control table, accurate temperature control; high-precision digital test table with cone penetration, reliable measurement results. Technical Parameters: 1. Measurement range: (0-600) cone penetration; 2. Cone-in time control device: 5 seconds, 8 seconds, 10 seconds, 12 seconds, 30 seconds, 60 seconds can be selected respectively, and the time error is less than ±0.1 seconds; 3. Resolution: 0.01mm; 4, cone penetration accuracy: ± 1 cone penetration; 5, heater power: 200W; 6, temperature control accuracy: (25 ± 0.1) ° C (Note: the ambient temperature should not be higher than 20 ° C); 7, temperature control mode: high-precision digital display PID temperature controller; 8, constant temperature bath: a hard glass cylinder; 9. Stirring: magnetic stirring beads are automatically stirred; 10, I cone weight (102.5 ± 0.05) g, matching cone weight 47.5g ± 0.05g, in line with the national standard 2015 version of the Pharmacopoeia specifications; 11. Lifting bracket: coarse adjustment and fine adjustment double lifting adjustment mechanism to facilitate the alignment of the cone tip with the sample plane; 12, working power: AC (220 ± 10%) V, 50Hz, power consumption is not more than 300W. 13. Dimensions: 280mm × 350mm × 700mm (length × width × height). 14, other: equipped with a cold light source and a magnifying glass, easy to use and operate.
Introduction: The HSY-0983 drug cone penetration tester is designed and manufactured according to the technical requirements and relevant regulations of the 2015 Pharmacopoeia "0983 Cone Measurement Method" of the People's Republic of China. It is mainly applicable to ointments, eye ointments and their commonly used matrix materials. (such as petrolatum, lanolin, beeswax) and other semi-solid substances, in order to control its soft hardness and viscosity and other properties, to avoid affecting the coating ductility of the drug. The degree of drug penetration refers to the use of free fall motion to release a cone of a certain mass downward from the cone meter at 25 ° C, and determine the depth of the test product within 5 seconds after the cone is released.
