Sales HSA820 Handheld Spectrum Analyzer，Manufacturer

Position: Home > > Measurement instrument > Other measuring/measurement instrument > Other measurement / measuring instruments > HSA820 Handheld Spectrum Analyzer

HSA820 Handheld Spectrum Analyzer

Product ID：CLQTqt Other002

Price: Please inquire PDF Format

Supply Ability:50 SETS/MON

Port:SHENZHEN

Product Introduction
Consulting

Model NumberHSA820

Brand NameANHUIBAILU

Payment TermsT/T, paypal

HSA820 Handheld Spectrum Analyzer
Introduction
The HSA820 handheld spectrum analyzer is designed to meet field operations. Lightweight and portable, fast and accurate, rugged and rugged, it has a wide range of measurement capabilities and is the best choice for superior performance and value.
The product uses a high-brightness 6.5-inch large screen for a dynamic look and clear picture. Large-capacity rechargeable battery with continuous working time of up to 4 hours, push-top battery compartment for easy replacement at any time, unlimited expansion of running time. Built-in options such as tracking sources, preamplifiers, field strength measurements, audio demodulation, and high-resolution bandwidth enable fast and reliable resolution of a wide range of routine measurement tasks to meet demanding and complex environmental requirements. Universal USB and LAN communication interface for remote control. Using the standard SCPI command set, you can quickly set up and upgrade an integrated test system for user measurement.
Features
Frequency range: 9kHz ~ 2GHz
Best sensitivity: better than -160dBm
Resolution bandwidth: 1Hz~3MHz
Dedicated transient detection for fast capture of transient signals
General and extended functions such as waterfall maps, modulation quality analysis, audio demodulation, etc.
Field strength measurement, S11 and S21, channel measurement, frequency counting and more professional options
Pass-Fail and other on-site detection alarm capabilities
Full charge up to 4h, ready for backup

Technical Parameters


Conditions		Preheat for 30 minutes while the instrument is in the calibration cycle and has performed self-calibration
Model		HSA820
Frequency Range		9kHz~2GHz
Freq Reading Accuracy		±（Freq standard reading×Freq reference accuracy+1%×sweep width+10%× RBW+0.5×[sweep width/（scan spot-1）]+1Hz）
Internal Benchmark（10MHz）		Aging Rate					<1ppm/ year
		Temp Drift					<0.5ppm （15℃至35℃）
Resolution Bandwidth（RBW）
Range(<10Hz as option)			1Hz to 500kHz（Continuous stepping from 1 to 10）、1MHz、3MHz
Selectivity（60dB/3dB）			RBW≤500kHz			<5：1 typical value（digital implement，close to Gaussian shape）
Accuracy						<5% typical value
Video Bandwidth（VBW）			10Hz to 3MHz
Display Average Noise Level （ 1Hz resolution bandwidth ， RF attenuator 0dB）
Pre-amplifier Off		100kHz to 1MHz <-100dBm-3×(f/100kHz)dB 1MHz to 10MHz <-130dBm 10MHz to 1GHz <-135dBm 1GHz to 2GHz <-131dBm
Pre-amplifier On		100kHz to 1MHz <-120dBm-3×(f/100kHz)dB 1MHz to 10MHz <-150dBm 10MHz to 1GHz <-155dBm 1GHz to 2GHz <-150dBm
Phase Noise
fc=500MHz		Frequency offset 30kHz -90dBc/Hz
		Frequency offset 100kHz -100dBc/Hz
		Frequency offset 1MHz -110dBc/Hz
Sweep Time
Non-zero Sweep Width		3ms to 3000s
Zero Sweep Width		1ms to 3000s
Sweep Mode		Continuous，single
Trigger
Trigger Source	Free，video，external
External Trigger Level	5V TTL level，nominal value
Frequency Counter
Counter Resolution	1Hz、10Hz、100Hz、1kHz
Counter Uncertainty	Freq reading× Freq reference accuracy+ counter resolution
Amplitude Accuracy（20℃至30℃）
Comprehensive Amplitude Accuracy（90%）				Input signal range 0dBm to -50dBm					±1.5dB
Amplitude
Measurement Range fc≥10MHz				Display average noise level to +27dBm
Maximum Safe Input Level				Average Continuous Power					+27dBm
Maximum DC Input Voltage				50Vdc
Input Attenuator Range				0 to 39dB，stepping as 3dB
1dB Compression Spot				+7dBm
Spurious and Residual Responses
TOI（Third-order Distortion）				>30MHz	+13dBm
SHI（Second-order Distortion)				>10MHz	+30dBm
Input Related Spurious Signals					<-60dBc
Residual Responses					<-85dBm
Tracking Signal Source(Options)
Frequency Range				100kHz to 1.5GHz
Output Power				-30dBm to 0dBm 1dB stepping
Output Flatness				±3dB
Input/ Output
RF Input/ Output				N -type negative（50Ω）
USB				Device port :USB 1.1 B connector Host port：USB 2.0 A connector
LAN				10/100 Base-T，RJ-45 connector
FM/AM Audio Demodulation				Speaker、earphone jack
Reference Input/Output				10MHz，BNC negative				Input power 0dBm to +10dBm
								Output power 0dBm±2dB
External Trigger Input				5V TTL level（±10V，100mA maximum）
Common Parameter
Display				TFT LCD，6.5- inch
Weight				Not over 2.8kg
Maximum Size				288×182×142mm
Working Temperature				0℃ to 50℃
Storage Temperature				-20℃ to +70℃
Power Supply				7.4V 6600mAh
Power Supply Consumption				Input				100V~240VAC 50/60Hz 1.5A
				Output				+9V 4000mA
Machine Consumption				13W

Introduction
The HSA820 handheld spectrum analyzer is designed to meet field operations. Lightweight and portable, fast and accurate, rugged and rugged, it has a wide range of measurement capabilities and is the best choice for superior performance and value.
The product uses a high-brightness 6.5-inch large screen for a dynamic look and clear picture. Large-capacity rechargeable battery with continuous working time of up to 4 hours, push-top battery compartment for easy replacement at any time, unlimited expansion of running time. Built-in options such as tracking sources, preamplifiers, field strength measurements, audio demodulation, and high-resolution bandwidth enable fast and reliable resolution of a wide range of routine measurement tasks to meet demanding and complex environmental requirements. Universal USB and LAN communication interface for remote control. Using the standard SCPI command set, you can quickly set up and upgrade an integrated test system for user measurement.