Introduction: The parallel concentration evaporator is under mild conditions. The basic principle is to quantitatively concentrate multiple samples to a specific volume of small instruments by simultaneous heating/depressurization/vortexing, effectively avoiding the destruction of certain targets by high temperature. The operator is supervised and has a high degree of automation.
Features: 1. Batch processing samples, single concentration of 6/12 samples, significantly improve the efficiency of the experiment; 2. Individual samples are sealed independently to strictly eliminate cross-contamination; 3. Optional concentration of the sample to 0.5ml or 1ml without operator care; 4. Gradient temperature control system, with a gradient pressure control system, no need for operators to take care of, more complex samples are processed; 5. The instrument is small in size and can be placed in a fume hood. The solvent recovery rate is high, reducing environmental pollution and injury to the experimenter; 6. Concentrate the sample by simultaneous heating/vortexing/vacuuming, the water bath is even, the concentration is fast and the bump is effectively prevented.
Technical Parameters: Batch processing samples: 6 digits, 200 ml standard test tube; 12 digits, 120 ml standard embassy Quantitative concentration volume: optional 1ml or 0.5ml Centrifugal rate: 5mm Speed: 0-600rpm Heating temperature range: room temperature +5 ° C ~ 100 ° C Temperature control accuracy: ±0.5 °C Heating method: PTC water bath heating Upper cover heating function: speed up the concentration, prevent condensation from recirculating, temperature setting (°C): 50, 55, 60, 65, 70 Host gradient temperature control, 5 programs can be set Test tube seal: single test tube is sealed independently, cross-contamination
Introduction: The parallel concentration evaporator is under mild conditions. The basic principle is to quantitatively concentrate multiple samples to a specific volume of small instruments by simultaneous heating/depressurization/vortexing, effectively avoiding the destruction of certain targets by high temperature. The operator is supervised and has a high degree of automation.
