Introduction: The 24T hot press HP-100 is a laminated hot press with a maximum temperature of 500 ° C. It is mainly composed of a 24T hydraulic press and two heating plates. The heating plate is made of chrome alloy (Cr12MoV), which is controlled by two temperature control systems. A cooling water pipe is embedded inside to allow cooling water to pass through for rapid cooling. Therefore, this machine is the best choice for making polymer and ceramic samples. Features: 1. A cooling water pipe is embedded inside the heating plate to quickly cool the sample. 2. The temperature control system can set up 30 sections of temperature rise and fall procedures. 3. Has passed CE certification. Technical Parameters: Product model: 24T hot press HP-100 Power supply: single phase AC208V-240V 50Hz/60Hz Maximum power: 1.6KW Maximum working pressure (in the heating state): 12T, the surface shows 20MPa Working temperature: continuous working temperature 450 °C (requires cold water), maximum working temperature 500 °C (<30min) Temperature control accuracy: ±1 °C Heating rate: 5 ° C / min Heating plate: chrome alloy, 90mm × 90mm Maximum stroke: 50mm Cooling water connector: 1/4" size: Hydraulic machine 260mm × 210mm × 610mm, Temperature control system 360mm × 300mm × 180mm; Weight: 60kg Optional accessories: water cooler
Introduction: The 24T hot press HP-100 is a laminated hot press with a maximum temperature of 500 ° C. It is mainly composed of a 24T hydraulic press and two heating plates. The heating plate is made of chrome alloy (Cr12MoV), which is controlled by two temperature control systems. A cooling water pipe is embedded inside to allow cooling water to pass through for rapid cooling. Therefore, this machine is the best choice for making polymer and ceramic samples.
